Thursday, April 26, 2018

DO IT YOURSELF BREW-BOSS "BRAIN" KIT - Electric Brew Controller


http://www.brew-boss.com/product-p/bb-brain.htm

For the Do-It-Yourselfer, purchase the "Brains" of the Brew-Boss controller. Add it to your existing electric brewery panel or start from scratch. A cost effective way to enjoy the benefits of the Brew-Boss system.

THIS KIT INCLUDES THE FOLLOWING:
  • ARDUINO TYPE BOARD PRELOADED WITH THE BREW-BOSS FIRMWARE 
  • BREW-BOSS CONTROL SHIELD WITH: 
    • WI-FI INTERFACE MODULE 
    • OUTPUTS FOR HEATER ELEMENT AND PUMP TO BE CONNECTED TO YOUR SOLID STATE RELAYS 
    • TEMPERATURE PROBE PORT 
    • ALARM BEEPER 
  • DIGITAL TEMPERATURE PROBE 
  • 12 DIGIT LCD SCREEN AND CABLE 
  • BREW-BOSS PANEL OVERLAY FOR LCD 
  • USB CABLE 
To use this kit you will need to supply your own wiring, solid state relays, water-tight cable glands, master power switch, and the control enclosure of your choosing. The black and red wires on the controller are for the heater and the green and black wires are for the pump. Both must be connected to solid state relays appropriately sized for the heater and pump wattage you will be controlling. An appropriate heat sink should be used as well.

We are offering this kit for those that already have created or want to create their own electric brewery control panels. No assistance will be provided by us in the design or implementation of the Brew-Boss controls other that support of the controller itself. Those purchasing this option should be familiar with high voltage wiring and control circuits.

Note: We no longer sell Android Tablets with our systems. You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger. The app is not designed for phones.

Warning - Shock Hazard!
This is an all electric system. It eliminates the many dangers associated with gas fired systems, but working with electricity is dangerous. You can be seriously injured or worse die by electricity. This system requires that you provide a 240VAC 30 AMP circuit and the appropriate power plug. A ground fault interrupter is highly recommended. If you are not comfortable or not knowledgeable with electrical wiring please have a certified electrician wire your system.

*** By ordering this product, you accept all liabilities for any and all damages that may occur by your usage of this equipment. Further you agree to install all equipment in accordance with your local codes and regulations as required.


Your Beer, Your Way!  Brew Like a Boss!

#electrichomebrewcontroller,#brewboss,#beer


Monday, April 9, 2018

BREW-BOSS BREW STAND WITH 22" X 22" PLATFORM


BREW-BOSS BREW STAND WITH 22" X 22" PLATFORM


http://www.brew-boss.com/product-p/stand-22x22.htm

Note: This is a new item and demand has been very high. Delivery could be 2-5 weeks after we receive your order. Please understand.

This stand is designed for the demanding homebrewer that wants the best at an introductory price of only $399! This industrial powder coated steel support stand has a 22 x 22" platform for your kettle to sit on. It is designed for Brew-Boss kettles ranging from 10 to 20 gallons. The platform is 12" from the floor, the perfect working height.

This custom designed stand also includes an integrated rotating hoist/boom support that allows you to use the optional lifting rope hoist we offer or upgrade to the optional electric winch mount that allows you to use the Harbor Freight style electric hoist. Of course you can supply your own lifting hoist as well. The innovative design allows you to remove your COFI filter, Brew-Basket, or Brew Bag easily and then rotate it away from the kettle to the side of the support and lower it into a waste can or plastic bin (neither included). The hoist arm is 96" high from the floor, so you will need to make certain you have adequate vertical space for this stand. It is possible to cut the vertical support for he boom shorter based on your needs, you just have to make certain you have enough lifting range to remove your COFI filer for your size kettle.





The cross member is proudly laser cut with the Brew-Boss logo and includes storage holes for your COFI input tube, COFI Lift Ring, and a Swirl-Boss! These items are not included and are shown to demonstrate where they go!


The stand includes an adjustable mounting plate for the Brew-Boss controller as well an adjustable swing arm mount for your tablet.

The Optional electric hoist mounting plate includes a custom bracket for the electric hoist, cable pulleys for the boom to route the cable through the boom, and all required fasteners as well.

This stand is heavy and does not qualify for free shipping! The stand ships in two boxes, each about 60 pounds.

Please note that the photos show a complete Brew-Boss Brewing System with our controller, tablet, lifting rope, etc. installed to show how the stand is used. This listing is only for the stand and does not include the actual brew system or lift rope shown.




Your Beer, Your Way!  Brew like a Boss!

#homebrewhoistandstand,#brewboss,#electrichomebrewequipment