Wednesday, August 23, 2017

Brew Boss: SET OF 3 SILICONE TRIVETS


$12.00 USD

http://www.brew-boss.com/product-p/trivets-3pack.htm

SET OF 3 SILICONE TRIVETS
These high quality silicone trivets are 7" in diameter by 5/16" thick. These can be used to set your kettle on to protect the surface you are brewing on. These also insulate the kettle from the surface preventing heat transfer loss from the kettle to the surface. The non-slip grip on these prevents the kettle from sliding around as well.

Color may vary.



Brew Boss - STAINLESS STEEL ACCESSORY PORT MOUNTED SWIRL-BOSS WHIRLPOOL WAND


http://www.brew-boss.com/product-p/sb-bb-apmount.htm

STAINLESS STEEL ACCESSORY PORT MOUNTED SWIRL-BOSS WHIRLPOOL WAND

This version of the Swirl-Boss is designed to connect directly to the accessory port on the Brew-Boss Kettle. It is constructed of 304 Stainless Steel and is CNC bent to allow a simple mounting arrangement. The threaded section is tig welded. This unit will last a lifetime! A female "High Flow" Camlock attaches to the male Camlock of the Brew-Boss accessory port. If you want to use the Swirl-Boss with your Brew-Boss system, this is the version you want. This item works on Brew-Boss 15 and 20 gallon kettles only. It is 16 inches long and will not work in 10 gallon kettles. Please be certain that you have at least 16.5 inches of distance between the accessory port and the bottom of the kettle.

NOTE: If you don't own a Brew-Boss kettle, and want to use this device, you need to also purchase our Value Accessory Port for your kettle. The Value Accessory Port allows you to easily connect a hose to the outside of your kettle. Installation of the accessory port requires drilling a 7/8" diameter hole near the top of your kettle.

The Swirl-Boss Whirlpool Wand is an innovative device that creates a very fast whirlpool in your wort, using only the standard pump supplied with the #BrewBoss system. A special laser cut Flow Matched “E” Nozzle Design Directs Water Jets Along Kettle Wall and Inward at the Proper Angle to Optimize Whirlpool Rotation. This provides the fastest whirlpool rotation speed available. #Whirlpooling is important to perform as it creates the magic “Hops Cone” in the middle of your kettle so you can transfer your wort to the fermenter free of hops trub. Because all the hops and other trub are forced to the middle of the kettle, transferring your wort to the fermenter via the valve on the outside of the kettle grabs clean wort, leaving the trub behind. Attach the Swirl-Boss to the accessory port on your Brew-Boss kettle and turn the pump on. In just a few minutes, the magic Hops Cone will be created.

Please note that the Swirl-Boss will not work with the Brew-Boss 10 gallon kettles.



Your Beer, Your Way!  Brew Like a Boss!!



Tuesday, August 22, 2017

RoboBrew - Video Brew Session by Brew Boss




Brew-Boss now handles the Robobrew brewing system for those customers on a tight budget or that need a 120 volt brewing system. In this video we brew a complete 6 gallon batch of a porter that we'll be aging in a bourbon barrel.

http://www.brew-boss.com/Robobrew-All-Grain-Brewing-System-with-Pump-p/robobrew-35l-pump.htm

#Brew-Boss is the pinnacle electric brewing system for those discerning customers that want the very best. For those on a tighter budget or for those that want a 120 volt system, we now offer the #Robobrew system.

The Robobrew is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere.

Features:
  • Stainless steel construction
  • 9 gallon total capacity with a finished beer output of 5-6 gallons
  • Digital temperature controller
  • 110v power and plug
  • Dual heating elements for total control (1000 watts and 500 watts)
  • Stainless steel 1/2 in ball valve for draining (don't have to use the pump)
  • Immersion wort chiller included
  • Stainless steel malt pipe/basket
  • Stamped volume markers
  • Glass lid
  • Magnetic drive pump for recirculation
  • Recirculation arm
  • 32.75 in H (with recirculation arm) x 12.5 in Dia


Your Beer, Your Way!  Brew Like a Boss!!


Monday, August 14, 2017

Brew Boss - Growing Hops on the Farm

The Brew Boss has been growing some fresh hops on the farm.  Now to decide what to make with them.


Hops are ready to pick



The Brew-Boss® System is a great value and competitively priced.

Brew-Boss Featur
automateses and Benefits
Brew-Boss controller  all temperature, timing, & pump control.
• Electronic process control provides consistent results batch after batch

• Available with Mesh Bag or the New COFI Filter System
• User defined steps configurable to nearly any brew process.
• Brew all-grain batches in 3½ hours including clean-up!
• Complete systems and conversion kits available.
• Supports Conventional or Brew-in-a-Bag (BIAB) brewing methods.



Your Beer, Your Way!  Brew Like a Boss!

Tuesday, August 1, 2017

Get your RoboBrew System from Brew-Boss



Brew-Boss is the pinnacle electric brewing system for those discerning customers that want the very best. For those on a tighter budget or for those that want a 120 volt system, we now offer the Robobrew system.


The Robobrew is an all-in-one electric brewing system that has built in elements for heating and boiling, a built in pump for recirculation, an onboard water resistant control panel for setting and monitoring temperatures, a removable grain basket, and a built in spigot for transfering. It is extremely portable and uses 110v power so it can be used nearly anywhere.

Built in magnetic drive pump to easily recirculate the wort during the mash. We recommend getting some silicone tubing to go with the recirculation arm. This allows you more control over the recirculation and you can then use the pump to transfer your wort to your fermenter.

Dual heating elements run off of a single 110 volt plug and have individual switches allowing for more control over the heating process. One element is 1000 watts and the other is 500 for a combined 1500 watts! Use both when you need to ramp up the temperature quickly either at the start to get to your mash temp or to go from your mash temp to boiling. Use only one of the elements when you want to hold a temperature.


The digital control panel makes it easy to see the current temperature and set the temperature you want. You can also set a delayed start of up to 23 hours in advance so that you can have your water hot and ready to go when you get home from work or get up in the morning. The digital controller is also water resistant so don't worry about spills or some water dripping down the side. This controller is built for brewing!

The brewery also includes a stainless steel malt pipe with false bottom allowing you to easily shift from mash tun to boil kettle during your brew day. The malt pipe includes a handle to lift it from the RoboBrew and tabs at the base so you can set the malt pipe over the RoboBrew to let the wort drain out. It also has feet at its base to raise the malt pipe slightly off the base and help prevent clogging.

The included stainless wort chillers is shipped with bare ends so you can set it up for your situation. We list below the most common tubing and fittings sold to help connect to a hose, hose bib, or faucet.

Note: The manual references an element for a different market. This unit comes with a two heating elements for a total of 1,500 watts.

Features:
  • Stainless steel construction 
  • 9 gallon total capacity with a finished beer output of 5-6 gallons 
  • Digital temperature controller 
  • 110v power and plug 
  • Dual heating elements for total control (1000 watts and 500 watts) 
  • Stainless steel 1/2 in ball valve for draining (don't have to use the pump) 
  • Immersion wort chiller included 
  • Stainless steel malt pipe/basket 
  • Stamped volume markers 
  • Glass lid 
  • Magnetic drive pump for recirculation 
  • Recirculation arm 
  • 32.75 in H (with recirculation arm) x 12.5 in Dia 
We recommend you also purchase 2 to 3 feet of our 1/2" ID silicone tubing for sparging, mashing, and draining.




Your Beer, Your Way!! Brew Like a Boss!!