Tuesday, January 19, 2016

Exploring the German Technique of Krausening




It’s a day or two after the yeast was pitched in your most recent homebrew and there are signs of fermentation in the form of foam called krausen. A few days later, the rocky froth nearly fills the headspace of your fermenter as the yeast work through their busiest period, known as high-krausen.

German lager brewers traditionally took high-krausen wort from a newly fermenting batch and added it to a fully-fermented batch of the same recipe. This process, known as krausening, introduces healthy, new yeast to pick up where the primary yeast—which went dormant due to the layering temperatures—left off.

The Uses of Krausening

Carbonation: Because of the German beer purity law (the Reinheitsgebot), use of sugars not derived from malt was not allowed, so alternative means were needed to supply a small dose of sugar for the yeast to convert and ultimately carbonate beer. The solution was to add high-krausen wort of the same recipe to an already fermented batch to provide the sugar needed for bottle carbonation. The same technique can also be implemented when naturally carbonating in casks and firkins. Some brewers will add non-fermented wort called spiese as the priming sugar, but the addition of active yeast from krausening was essential in carbonating lagers.

(Re)Start Fermentation: While all instances of krausening are technically activating fermentation, the process can be used for various instances of either starting or restarting fermentation. Using the krausening technique to initiate fermentation is essentially the same as making a starter, where the entire contents of the starter would be added to the wort at the height of its activity. If you are experiencing stuck fermentation or need to finish off a high-gravity beer, krausening adds more healthy yeast that are up to the task. And, as was the case in traditional brewing, krausening can be used to add more yeast to a finished lager ready for conditioning and carbonation where the initial yeast has gone dormant due to the chilly fermentation temperatures.

Cleaning Up “Green” & Off Flavors: While carbonation was the primary goal of krausening in traditional German lager brewing, it was also recognized as a way to clean up some of the “green” qualities found in young beer by aiding the maturation process. It can also be used to help with flaws such as diacetyl and acetylaldehyde. Adding more yeast through krausening is also said to help reduce oxidation in batches that may have been unintentionally aerated.

Practical Applications for Homebrewers

For the homebrewer, krausening is not always a practical procedure. It is much simpler to just mix up a priming sugar solution and add it to the un-carbonated beer rather than saving or re-brewing wort for krausening. Of course, if you want to truly replicate a historical German lager or experience a different brewing technique, then this is a great opportunity.

If you do decide to pursue krausening, bear in mind there is a high risk for contamination. Clarity can also become an issue since homebrewers don’t typically have the filtering methods available to commercial brewers.

However, krausening does have benefits that may be tempting to the homebrewer. If using krausening as a means to carbonate bottled beer, particularly smaller batches, you can rest assured that you are not diluting your beer with sugar water. Krausening can also be used to clean up the “green” flavors in beer or possible oxidation. The tricky part with this is needing to use the same wort as the main batch, so you either need to store wort from the original batch or brew a new, identical batch.


Sources: Brewing Better Beer by Gordon Strong; How To Brew by John Palmer; The Oxford Companion to Beer by Garret Oliver et al; “Krausening Home Brewed Beer” by Brad Smith (BeerSmith Blog)

Monday, January 18, 2016

Brew Boss Video - How to clean your Chugger pump.

#Brew-Boss is starting a new Brew-Boss Tips and Trick video series. Here is the first one. 

How to clean your Chugger pump.

Brew Boss Electric #Homebrew Equipment
www.brew-boss.com

Sunday, January 17, 2016

Mastering the Art of Bottle Conditioning


Bottling catches a lot of flack, especially from the die-hard keggers out there. Sure, preparing and filling a few cases of bottles is more labor-intensive than racking to a single keg, but packaging homebrew in bottles also has its benefits.

For one thing, grabbing a 6-pack of bottles to share or give to friends is quite a bit more convenient than shlepping a keg, CO2 tank and tap gear. Bottles are also perfect for long-term aging without taking up too much space in the cellar. And sometimes, there’s just nothing like popping a bottle of your own homebrew and hearing that “pffft” sound before pouring a beer into a glass.

To successfully bottle condition beer, it is important to take into account four key components: yeast, sugar, temperature and time.

Yeast

First and foremost, is yeast. Without enough viable yeast, there is nothing to convert sugar into CO2, which is what creates carbonation. If a beer undergoes a standard, healthy fermentation then there should be no issue with having enough yeast ready to do just a little bit more work to bottle condition beer.

Issues can arise, however. Extended fermentation periods, as well as highly flocculent yeast strains paired with lengthy secondary aging can cause yeast to go dormant. Filtering beer can also prevent enough viable yeast from making it into the bottling bucket. In these instances, more yeast can be pitched, which is actually sometimes standard procedure in many commercial breweries that bottle condition filtered beer.

The moral of the story—make sure the yeast is happy, healthy and up to the task of bottle conditioning your homebrew.

Sugar

The next vital key to the bottle conditioning puzzle is sugar. Without enough fermentable sugar, yeast will have nothing to transform into CO2 and carbonate beer. There are a few options for ensuring sugar levels are where they need to be to achieve the desired level of carbonation without fear of creating the dreaded “bottle bombs” (bottles that explode to due being over pressurized).

The daring homebrewer may determine when there’s just enough fermentable sugar left during fermentation and bottle at this point, but this is quite risky and without some experience with the particular recipe you’re brewing. The more common route is to wait for primary fermentation to complete fully, pick an easily fermentable sugar and add it to the bottling bucket. Rack the beer atop the sugar, mix it in thoroughly (without splashing!) and fill the bottles.

Corn sugar is the go-to priming sugar for many homebrewers because it is a simple sugar that is easily converted by yeast in a short time span. But brewers use everything from malt extract to honey to bottle condition beer. It is important to point out that different sugars have varying degrees of fermentability and will take different amount of times to achieve conditioning.

But wait! One of the most important parts of priming sugar is determining how much you need to achieve a specific level of carbonation, measured in volumes of CO2. The general rule of thumb used by beginners is 3/4 cup (177g) of corn sugar per 5 gallon batch to reach 2.25-2.5 vol. CO2. But, if you are after something with a higher or lower level of fizz, then you need to make some measurements.

Use the nomograph below to determine the amount of sugar you need to reach a specific level of carbonation. This is intended for a 5 gallon batch, but the amount of sugar determined for 5 gallons can be scaled to any volume. To use the nomograph, mark the temperature at which the beer will be bottled, the volumes of CO2 you’re after and then connect the lines with a straight-edge. Where the lines intersect the meter all the way to the right will determine how much corn or cane sugar is needed to reach that level of carbonation. Simple! Brewing software and online calculators can also be used to determine priming sugar amounts.
Carbonation Chart
Click image to enlarge. Graph From How To Brew by John Palmer.

Temperature

As with primary fermentation, temperature plays a big role in how efficiently yeast will do its job converting sugars into alcohol and CO2. At the very least, filled and capped bottles should be stored at the temperature it was held during primary fermentation. A little warmer can be even better. 68-80°F is the general range for bottle conditioning.

If you notice your bottles are having a hard time fermenting, but you’re confident with the yeast and priming sugar levels, it could very well be the temperature. Try sticking the bottles in a slightly warmer place and keep them off cold cellar floors that may be deceptively colder than the ambient temperature.

Time

Last but not least is time. Bottle conditioning typically takes 2-4 weeks to complete when using corn sugar. If you pop a bottle at two weeks, you’ll likely still hear the “pffft” of carbonation, assuming everything went to plan, but aging time up to a month is beneficial to ensure all the priming sugar has been consumed and the carbonation level has reached its fullest potential.

It’s important to remember that different priming sugars will take various lengths. Honey, for example, typically takes a bit longer than corn sugar. After two weeks, open a bottle every week or so and track the carbonation. Once you enjoy what you taste, it’s time to enjoy the fruits of your labor!
Sources: “Putting the Bubble in Your Beer” by Ray Daniels (September/October 2001Zymurgy); “For Easier Bottling” by Chuck Skypeck (September/October 2001 Zymurgy);How to Brew by John J. Palmer

Friday, January 15, 2016

What to Age in Your Beer Cellar


Cellaring is the process of allowing a beer to mature under specific conditions to achieve nuances, particularly in its flavor and aroma, that often can only be achieved with aging. What you’re left with after aging beer successfully is what is called “vintage beer.”

Choosing a Beer Cellar Location

Before jumping into some tips on what makes a beer optimal to age (because not all of them are!), it is important to understand the beer cellar environment that is ideal for aging beer for an extended time.

1. Temperature

Arguably the most important aspect of a beer cellar is the temperature. 55°F (12.8°C) has become a widely accepted temperature for aging most ales. Lagers aren’t usual suspects for cellaring, but a good rule to follow is to aim to keep beer cellar temperatures about 10°F below the temperature at which the beer is fermented.

Generally, ales are fermented around 65°F (18.3°C) and lagers at 50°F (10°C). Being able to maintain a temperature in this range with little fluctuation will allow the beer to mature at an appropriate rate. If it’s too cold, the maturation period slows significantly, and if too warm it can speed things up and cause off-flavors.

2. Darkness

The second thing to keep in mind is light. Keep your cellar dark! UV light interacts with hops in beer to create the dreaded light-struck flavor, otherwise known as “skunked” beer. Keep your beers shielded from light in any way possible, especially if they are packaged in clear or green bottles. A cheap way to prevent light-struck beer is to stick them in a sealed box or paper bag.

Those are the basics, but the trickiest part for cellaring is deciding which beers are suitable for aging because, after all, some just aren’t up for the task.

Tips for Picking a Beers to Cellar

1. The more alcohol, the better

When aging beer, it is crucial that there is a preservative present, which will essentially slow the aging process. A good rule of thumb is to aim for a beer that has at least 8% alcohol by volume (ABV). You may think speeding up the aging process is desirable, but in the case of cellaring beer the best technique is a slow-and-steady approach. A preservative like alcohol makes beer more resilient to potential staling flavors, which are typically caused by oxidation. And keep in mind that the booziness that is often present in fresh beers with high ABVs will typically mellow over time, allowing other flavors to come to the forefront.

All of that being said, there are some exceptions to the “more alcohol, the better” rule. The lactic acid in sour beers and the smokey phenols in smoked beers also act as preservatives, lessening the importance of the level of alcohol.

2. Body by beer cellar

During the aging process, the malt proteins present in beer will drop out. This reaction causes the body of beer to reduce over time, and the result is often a very thin and some cases overly-dry beer after it’s been aged. Wheat-derived proteins tend to fall out exceptionally quick, making wheat-based styles very tricky to age successfully. Because of this, it is important to cellar beers that are very full-bodied when they are fresh. This allows the malt proteins to drop out while still retaining some of the body and overall balance.

If a beer seems to thicken, becoming almost syrupy over time instead of thinning, it most likely means the alcohol character has decreased (as mentioned in #1) to the point where it creates the impression that the body thickened.
Esters-Phenols-Homebrew-slider
3. Mind your esters and phenols

The yeast-derived character of both esters and phenols will evolve and change over time, which may or may not be desirable depending on the base style of the beer.

The fruity esters—reminiscent of pears and other tree fruits—commonly found in Belgian and some British style ales will develop into more dark fruit-like character (think raisin and figs). Banana esters, like those common in German hefeweizens, tend to disappear altogether in a fairly short span of time. Esters from Brett will take much longer period of times to change, but have the potential to achieve interesting flavors like pineapple and grapefruit.

Phenols—the spicy yeast flavors that come across as clove or pepper—will evolve into much different flavors, including vanilla, tobacco and leather. In instances where earthy phenolics are present in the fresh beer, there is the potential to achieve complex flavors that are all but impossible to achieve unless done with aging.

4. More hops isn’t always best

Remember when we said beer needs some sort of preservative to be a good candidate for cellaring? Well, despite hops reputation as being originally used for its antibacterial utility, hop bitterness and flavor/aroma are not well suited for aging. Simply put, the presence of hops fades over time, and this can drastically affect the balance of a beer. After all, if a hoppy beer style like IPA was brewed to a desirable balance of malt and hops, then reducing the presence of hops can throw this harmony out of wack.

In some instances hop character not only diminishes but can result in unfavorable flavors left behind. For example, American hop varieties with high levels of alpha acids can leave behind stale, paper-like flavors. On the other hand, English hop varieties with high beta acids, which are said to have a better chance of retaining bitterness, can impart fruity notes similar to pineapple and cherry as they age.
how-to-grow-hops-slider
5. Sours

Sours can be a tricky beast when aging, and the results may not be what you expect. First off, the tart, lip-puckering character that puts the “sour” in “sour beer” will lessen with time, diminishing that typically-dominant characteristic. This softening of the sourness can be either a good or bad thing depending on the balance of the cellared beer at the time it’s consumed.

It’s important to note that while the sour character mellows and in some instances evolves (as with Brettanomyces) at a very, very slow rate, it is not uncommon for some sour beers to become even more sour in the first few years it’s being aged. It’s also not unusual for sour beers that have been aged for extended periods of time to appear more sour due to other characters, particularly the malt, diminishing.

Brett (short for Brettanomyces), though slow to evolve in the cellar, can undergo very drastic evolution when aged. Brett is a slow-acting yeast but a hungry one, and it will basically eat through all available fermentable sugars slowly but surely. This means extensive aging can often leave Brett beers bone dry, which can throw off the balance. During this process, the esters can evolve as mentioned in #3, but there is also the potential for aggressive phenolics to develop, which can be undesirable.

6. Keep the yeast in the bottle

Beers that are bottle conditioned, unfiltered and/or unpasteurized are generally better-suited for aging. By having yeast in the bottle, the beer is essentially a living entity that can consume residual oxygen and continue to condition slowly. This opens up a wider possibility of aging produced cellar character that a beer without yeast otherwise might not be able to achieve.

Filtered and/or pasteurized beers can still exhibit character evolution from aging but to a much lesser extent.

Sources: This post is based on the 2015 National Homebrewers Conference seminar “Crafting Cellarworthy Homebrew” presented by Patrick Dawson, author of Vintage Beer: A Taster’s Guide to Brews That Improve over Time. Download the audio/visual presentation of “Crafting Cellarworthy Homebrew.”

Wednesday, January 13, 2016

Hopped up IPA

India Pale Ale
All Grain

Brewer/Contributor: Don Pfeiffer
Batch Size: 5.50 gal
Boil Size: 7.00 gal

Hopped up IPA
Type: All GrainDate: 8/19/2004
Batch Size: 5.50 galBrewer: Don Pfeiffer
Boil Size: 7.00 galAsst Brewer:
Boil Time: 60 minEquipment: Shakey Dog Brewery
Taste Rating(out of 50): 35.0Brewhouse Efficiency: 70.00
Taste Notes:
 
Ingredients
AmountItemType% or IBU
9.00 lbPale Malt (2 Row) US (2.0 SRM)Grain64.29 %
2.00 lbCaramel/Crystal Malt - 20L (20.0 SRM)Grain14.29 %
2.00 lbWhite Wheat Malt (2.4 SRM)Grain14.29 %
1.00 lbVictory Malt (25.0 SRM)Grain7.14 %
0.50 ozChinook [13.00 %] (60 min)Hops19.8 IBU
1.00 ozCascade [5.50 %] (45 min)Hops15.4 IBU
1.00 ozCascade [5.50 %] (30 min)Hops12.9 IBU
1.00 ozCascade [5.50 %] (15 min)Hops8.3 IBU
1.00 ozCascade [5.50 %] (5 min)Hops3.3 IBU
1.00 ozCascade [5.50 %] (Dry Hop 7 days)Hops-
1 PkgsCalifornia Ale (White Labs #WLP001)Yeast-Ale
 
Beer Profile
Est Original Gravity: 1.065 SGMeasured Original Gravity: 1.065 SG
Est Final Gravity: 1.014 SGMeasured Final Gravity: 1.010 SG
Estimated Alcohol by Vol: 6.56 %Actual Alcohol by Vol: 7.18 %
Bitterness: 59.6 IBUCalories: 290 cal/pint
Est Color: 10.0 SRMColor:
Color
 
Mash Profile
Mash Name: Single Infusion, Medium Body, No Mash OutTotal Grain Weight: 14.00 lb
Sparge Water: 4.56 galGrain Temperature: 72.0 F
Sparge Temperature: 168.0 FTunTemperature: 72.0 F
Adjust Temp for Equipment: TRUEMash PH: 5.4 PH
 
Single Infusion, Medium Body, No Mash Out
Step TimeNameDescriptionStep Temp
60 minMash InAdd 17.50 qt of water at 165.9 F154.0 F
 
Mash Notes: Simple single infusion mash for use with most modern well modified grains (about 95% of the time).
Carbonation and Storage
Carbonation Type: Corn SugarVolumes of CO2: 2.4
Pressure/Weight: 4.2 ozCarbonation Used: -
Keg/Bottling Temperature: 60.0 FAge for: 28.0 days
Storage Temperature: 52.0 F

http://beersmith.com/Recipes2/recipe_242.htm
 
 

Monday, January 11, 2016

Brewing India Pale Ale Recipes IPA Beer Styles

Brew Boss - Electric Homebrewing Systems www.brew-boss.com

India Pale Ale (or IPA) is a popular staple of homebrewers, microbrewers and hopheads who enjoy brewing some of the hoppiest beers on the planet. This week we look at India Pale Ale beer recipes, how to brew an IPA recipe and its history.

History


According to Wikipedia, India Pale Ale traces its origins to the 17th century in England with the earliest pale ales. In fact, new malting techniques developed at the start of the 17th century using coke-fired as opposed to wood-fired kilns enabled production of the first pale malts, and subsequently paler beers. One of the popular pale styles was a beer called October beer, which was highly hopped and designed to be stored for an extended period. Note that this October beer bears no relation to German Oktoberfest beer.

George Hodgson, owner of Bow Brewery brewed a version of October beer that was popular among the traders of the East India Trading Company in the late 1700’s. East India traders subsequently started trading many of Hodgson’s beers including his October beer. The highly hopped, high gravity, highly attenuated pale ale actually benefitted from the long trip to India and became popular with consumers there.

Other brewers, including several large Burton breweries like Bass, Alsop and Salt lost their European export market in Russia due to new high tarrifs on beer. They quickly emulated the October beer of Bow Brewery and also started exporting to India. The style, which now was now commonly called “India Pale Ale” became popular in England as well around 1840.

The IPA Beer Style


IPA is a hoppy, fairly strong pale ale traditionally brewed with English malt, hops and yeast. The American version has a slightly more pronounced malt flavor and uses American ingredients. The BJCP style guide for 2008 places original gravity at between 1.050 and 1.075, and highly attenuating yeasts are used to drive a final gravity between 1.010 and 1.018 for 5-7.5% alcohol by volume.

Multiple hop additions dominate the flavor profile in IPAs. English IPA’s typically have 40-60 IBUs, though the slightly stronger imperial IPA versions can have hop rates as high as 120 IBUs.

Color is similar to many pale ales – golden to deep copper color – varying between 8-14 SRM for the finished beer. Moderate carbonation is often used, though some English IPAs are lightly carbonated.

Brewing an IPA


Hops dominate the flavor of an IPA, so careful selection of the hop additions is critical to success. Traditional English IPAs use popular English hops such as Fuggles, Goldings, Northdown, Target, though sometimes noble hops are also used in finishing. Higher alpha English hops are also popular for bittering. American IPAs use the rough American equivalents such as Cascade, Centennial, Williamette, though again higher alpha hops are often used in bittering.

Multiple hop additions are almost always used for IPAs including bittering hops at the beginning of the boil, often several additions of finishing hops in the last 5-15 minutes of the boil, and dry hops to provide a hoppy aroma. In general, higher alpha hops are used for the base boil addition while aromatic lower alpha hops are used in finishing and dry hopping, though some traditional IPAs use lower alpha English hops throughout.

Traditional English 2-row pale malt makes up the bulk of the grain bill (or two row American malt for the American IPA), usually around 85-90% of the total. Crystal and caramel malts are traditionally used to add color and body to achieve the desired overall color both in extract and all-grain recipes.

Chocolate and black malts are not often used in commercial examples though they occasionally make their way into home-brewed recipes. Personally I prefer moderately colored caramel/crystal malt. Occasionally you will see wheat, flaked barley or carapils malt added to enhance body, though these are rarely used and only in small quantities.

As many IPAs were first brewed in the English city of Burton, they share much with their English Pale Ale cousins, including the unusual Burton water profile which accentuates the hoppy profile. The Burton water profile has extremely high concentrations of calcium carbonate and bicarbonate. Depending on your local water source, a small addition of Gypsum (CaSO4) can sometimes help to simulate the hop-enhancing high carbonate Burton waters.

IPAs are most often made with traditional English ale yeasts, though care must be taken to choose a highly attenuating yeast and avoid some of the lower attenuating, fruity British ale yeasts. Many brewers bypass the problem entirely by choosing a highly attenuating American or California ale yeast for a cleaner finish.

All grain IPAs should be mashed at a lower temperature than pale ales to achieve the high attenuation desired. A mash temperature around 150F for 90 minutes will aid in breaking down more complex sugars for a clean finish that accentuates the hops.

IPAs are fermented and stored at the traditional ale temperatures, usually around the mid 60’s F. Long storage periods are sometimes required to achieve the proper hop-malt balance.

http://beersmith.com/blog/2009/09/13/brewing-india-pale-ale-recipes-ipa-beer-styles/
by BRAD SMITH

Saturday, January 9, 2016

How to Choose a Yeast Strain




Selecting the right yeast for the job is simple, right? Just pick one with a name that echoes what you’re brewing: American ale for pale ale, Scottish ale for wee heavy, Czech lager for Pilsner, and so on. Nothing to it!

Well, yes and no. Choosing a strain by name alone isn’t a bad way to start. After all, there’s a reason for the names, and selecting a yeast according to its name is unlikely to steer you too far away from where you’d like to be. But it’s also important to look at certain performance indicators to make sure your chosen strain is up to the job.

Here’s what to look for when deciding on a yeast.

Attenuation


Attenuation refers to the percentage of available wort sugars that a yeast strain actually ferments. More commonly, brewers talk in terms of apparent attenuation, which is the attenuation calculated purely from hydrometer readings. Typical values are
Low: 72 percent and lower
Medium: 73 to 77 percent
High: 78 percent and up

The desired degree of attenuation is partly a matter of style and partly one of personal preference. Using a low-attenuation yeast for a saison or a high-attenuation yeast for a mild ale is likely to disappoint. But I’ve discovered that I tend to prefer a drier finish in most of my beer, so I tend to err on the side of more attenuation than less.

TAKE-AWAY: Select a yeast strain that exhibits the right level of attenuation for the beer style and for your palate.

Flocculation


Flocculation is the readiness with which yeast cells clump together and, having reached a critical mass, drop to the bottom of the fermentor. British strains are famously flocculent: After fermentation is complete (and sometimes before!), yeast cells form a compact cake on the floor of the fermentor that comes off in chunks. Strains that demonstrate low flocculation, such as Weizen yeasts, tend to laze about and remain in suspension well past the end of the party. In extreme cases, the beer has to be refrigerated (or, in a commercial setting, centrifuged) to separate the yeast.

TAKE-AWAY: Select a yeast strain that flocculates in a manner appropriate to the beer you’re brewing.

Alcohol Tolerance


Alcohol tolerance describes how much alcohol a yeast strain can tolerate before it stops working. Brewers have selectively pressured yeast strains over the years to adapt to different conditions, and breweries that have favored high-alcohol beer will typically have yeast strains that have risen to the challenge. A cold-fermenting Pilsner strain works well for lagers with less than 10 percent alcohol, while Rogue’s famous Pacman ale yeast can easily carry you into barleywine territory.

TAKE-AWAY: Select a yeast strain that can survive beyond your beer’s estimated alcohol level.


Temperature Range


Temperature range is the—wait for it—range of temperatures in which a yeast works best. Note that I said “best.” Virtually all yeasts will continue to ferment at temperatures well above the indicated limit, but you probably won’t like the results: Think overpowering esters and off flavors. Below the recommended range, you might experience a sluggish fermentation. Knowing a yeast’s optimal temperature range is important for a couple of reasons:
Your equipment (or lack thereof) may limit you to fermenting at certain temperatures.
Depending upon the flavor profile you want, a cooler or warmer fermentation may be desirable.

TAKE-AWAY: Choose a yeast that satisfies your needs for both fermentation environment and flavor profile.

And speaking of flavor profile...

Sensory Profile


Sensory profile is a major driver of the flavor and aroma profile of the finished beer and also the hardest to describe. Attenuation, flocculation, alcohol tolerance, and temperature range are all quantifiable, but sensory descriptors are imperfect and subjective. And a yeast strain’s sensory characteristics change depending on temperature, pitch rate, oxygen levels, and other variables. In short, the only way to really know is to brew with it. Read the descriptors to get a general idea, and then take notes on how you perceive the results.

TAKE-AWAY: Practice, practice, practice!

AUTHOR: DAVE CARPENTER