Want to brew beer at home? There's an app for that! Designed by an automation engineer to provide industrial level process control for the home brewer. The app steps and talks you through the brewing process. All electric brewing in your home. Make your own better quality beer for less than you can buy it. Infinite home brewing recipes to try. Go to www.brew-boss.com to get started!
Brew in a bag (BIAB) continues to grow in popularity as a cheaper and simplified way to pursue all-grain brewing. Here are five benefits of BIAB when moving to the mash.
1. Minimal Investment
Jumping into all-grain brewing can be daunting, not only because of the additional procedures that must be grasped, but the perceived cost of acquiring a mash tun and sparge pot. Sure, a mash tun can easily be built for a relatively low price, but it still isn’t as cheap as simply buying a large grain bag.
Full-boil extract and partial mash brewers only need to buy a grain bag large enough for their recipes. Newbies looking to jump straight to all-grain just need a large boil pot and grain bag, which is more or less the same as when pursuing full-boil extract with specialty grain batches.
2. Simplified Procedures
While you must pay careful attention to mash rest temperatures and duration, the all-grain process is actually simplified when doing BIAB.
Traditional steps like the vorlauf, latuering and sparging are basically skipped, though the same results achieved as if mashing and lautering in a tun.
With no-sparge BIAB, simply mash in enough water to leave you with your desired pre-boil gravity, remove the grains and let them drip dry, and carry on with the boil as usual.
3. Small Footprint
All-grain brewing with traditional mashing equipment can make for a cramped brew day, especially if you are strictly an indoor brewer. When doing no-sparge BIAB, all you have is one pot. That’s it—no mash tun or pots in addition to the boil kettle. Heck, you could probably get two mashes going with all of that extra space!
And when you’re done, throw the cleaned and dried grain bag into your boil kettle and stick it in storage. This takes up considerably less space than a mash tun and multiple pots. If you are an apartment brewer, you will appreciate how much space this actually saves.
4. Quick Cleanup
Let’s face it, as homebrewers, we spend quite a bit of time cleaning and sanitizing (and cleaning some more).
When brewing all-grain with BIAB, less equipment means less things to clean at the end of the brew day.
On top of that, simply pull the bag of grains out, dump them on your compost pile, and give the bag a rinse to clean your “mash tun.”
If you’re feeling particularly unmotivated, throw your grain bag in with your next load of laundry (but avoid the scented detergents)!
5. Highly Adaptable
While the previous points all assume a single-vessel, no-sparge brew in a bag process, BIAB is actually highly adaptable depending on one’s goals as a homebrewer. If you shutter at the idea of no-sparge, mash in with the standard 1-2 quarts of strike water per pound of grain and account for the rest of the pre-boil gravity with sparge water!
This sparge step can also be particularly beneficial to those who want to do BIAB but don’t have a pot large enough to fit no-sparge volumes. BIAB also lends itself to step mashes since it takes place in a vessel that can withstand direct heating, as well as allowing for a high degree in flexibility with final batch volumes.
Looking for an Electric BIAB give Brew Boss a try. www.brew-boss.com
BIAB is an acronym for Brew In A Bag. It is a dead simple all grain brewing technique. All it requires is a large grain straining bag, 15 gallon kettle and a heat source. This method is excellent for brewers who are wishing to convert from extract brewing to all grain, because you can make that leap for a very minimal cost. It will also save an all grain brewer 1.5-2.5 hours on a typical brew day.
BIAB utilizes THREE pieces of equipment:
The kettle: This kettle is the ONLY vessel required to BIAB. The only special requirement is that the kettle have a volume of at least 15 gallons for a 5 gallon brew session. This is because this one vessel will have to hold your entire water requirement as well as your grain bill. This volume will regularly exceed 10 gallons. You will mash and boil in this vessel.
The bag: This is a mesh bag that is large enough to conform to the inside diameter of the kettle and reach over the top lip. This bag is sometimes likened to a large pillow case, the kettle should be able to fit INSIDE it while still being able to close the top of the bag. Typically composed of “voil” or another mesh like material, this will hold your grain bill and must be strong enough to hold the water saturated grain when you lift it out of the mash water at the end of the mash.
The heat source: This can be the typical “turkey fryer” burner that is used widely by home brewers. Also on the market and better for keeping consistent temperatures are electric brewing systems, utilizing heater elements that go right into the kettle. The heat source will be utilized to provide heat for strike water, maintaining mash temperature, mash-out and the boil.
Fig 1.
The process: Crush your grain finer than you would with a typical all grain brew. This is because you no longer have to worry about a stuck sparge. The bag is the filter and the finer crush will improve your conversion efficiency.
Fill the kettle with the TOTAL water required to complete the entire brew session. Take into consideration that the water absorbed by the grain with this method is about HALF that of a typical all grain brew session that utilizes a MLT. Remember, when you remove the grain bag after the boil, the wort that is left is exactly what you are boiling, so calculate this carefully. Insert and secure the bag at this time.
Fig 2.
After heating the water in the kettle to your calculated strike temperature, pour your entire grain bill into the secured bag. Use a mash paddle to thoroughly mix the grain with the water so that there are no dough balls. There will be a very large volume in the kettle, so temperature control should be as easy as intermediate stirring and a couple quick firings of the burner if the temperature drops.
Fig 3.
After the mash is complete you heat the mash to mash-out temperature, which is crucial to achieving good efficiency with BIAB since you are NOT rinsing the grains.
After mash-out, remove the grain bag and allow it to drain into the kettle. Some brewers will place a rope and a hook above the kettle to suspend the grain bag as it can become heavy with larger grain bills.
Fig 4.
Fig 5.
Finally, boil the wort just as you normally would.
Fig 6.
Here are a few important points to make about BIAB:
**DO have a large enough kettle to accommodate about 9 gallons of water AND your grain bill.
**DO have a bag large enough that you can fit the kettle INSIDE it and still close the top.
**DO crush your grain fine, it will produce better conversion efficiency and there is no danger of a stuck sparge.
**DO NOT skimp on mash time, this is more crucial with BIAB, mash for 60-70 minutes to achieve full conversion.
**DO NOT allow your grain bag to come into contact with the bottom of the kettle when you are applying heat, it may melt! Some place a wire cake cooling rack in the kettle to lift the bag off the bottom.
Practically black and forever brooding, stout’s claim to fame is its swirls of cocoa, coffee, char and cola notes extracted from roasted malt. But the style’s ever-expanding with fruit, barrels and hops shining new light into our favorite dark brew.
1. Cocoa conspires with all that dark roast to elevate chocolate stouts to confectionary status.
2. Coffee stouts give a double jolt: The first from real coffee (beans or cold brew!) in the batch, the second from some bonus booze.
3. Beans in the brew give vanilla stouts a floral, high-pitched sweetness.
4. Real bivalves—meat and shells!—lend a distinct brininess to oyster stouts.
5. Funky, fruity Belgian yeast gives Belgian stouts a strangely alluring sweet spice.
6. Blueberries, pineapple, squash; there’s no limit to the sweet stuff brewers will slip into a fruit stout.
7. Smoldering smoked stouts spark a little campfire (via smoked malts) in every sip.
8. Sturdy malts make stouts good for wood. Barrel-aged stouts nap in new vats or ones that once held rum, whiskey or wine; they emerge mature and high in alcohol.
9. A little lactose in the brew gives sweet stouts velvety creaminess and a milky-sweet smirk.
10. Oatmeal stouts augment roasted barley with sweet oats for a chewy, crazy-creamy mouthfeel.
11. Intense roast, complex malts and high alcohol make imperial stouts some of beer’s biggest boozers.
12. Sessionable dry stouts are a step up from porters—and fish ‘n’ chips best friend.
13. Bitter U.S. hops color American stouts with subtle greenness.
14. Like foreign extra stouts but sweeter, tropical stouts dial up their fruit and molasses flavors.
15. Assertive roast headlines foreign extra stouts, but ABVs under 8% keep them manageable.
Want to brew your own stout? Brew Boss has the system for you!
Cheers! www.brew-boss.com
Brew-Boss.com has developed a new technology we are calling the COFI filter. COFI is an acronym for:
Center Out Forced Infusion
The Brew-Boss COFI filter is an exciting new patent pending technology that optimizes the efficiency of Brew-In-A-Bag (BIAB) type brewing. The filter is manufactured from 304 grade stainless steel mesh which holds the grain during the mash process, but allows water to flow through.
A central infusion tube, that is perforated with a series of flow-matched holes, extends all the way to the bottom of the filter.
During the mash cycle, water/wort is continuously pumped from the bottom of the kettle to the top of the filter, into the central infusion tube, where it is forced through the grain bed. Water passing through the grain bed flows out of the filter to the bottom of the kettle. This Center Out Forced Infusion (COFI) technology assures that all the grain is in constant contact with the mash water and that there are no dead spots. No stirring is required as the system is self agitating and efficiency is thereby optimized. The COFI filter is also very easy to clean, simply invert it in a sink and spray it with your sprayer! Because it is made of stainless steel, it will not rust and will last indefinitely.
The central infusion tube is also connected to a false bottom. After mashing is completed, the elbow fitting at the top of the COFI filter is exchanged with a lifting ring. When removing the filter, the filter is lifted by the lift ring. This brings the false bottom towards the fixed cover, allowing the weight of the filter to squeeze the grain. This squeezing action extracts much of the trapped sweet wort from the grain.
Visit www.brew-boss.com and purchase this new technology for your home brewing!
Ask any home brewing expert and they will tell you: The best tips on brewing the perfect batch come from real-world experience, which is exactly what four homebrewers are sharing here.
Don't Be Afraid to Experiment With Flavors
"With one exception I've never brewed the same recipe twice," says James Schirmer, an institutional research analyst at the University of La Verne. "I've brewed beers with various spices, chocolate, fruit, and anything that I think may lend itself well to a beer."
Schirmer says one of his most successful batches was a wheat beer brewed with hibiscus flowers. "I got the idea from my mother-in-law, who mentioned one of her favorite drinks is made with hibiscus flowers," he says. After trying it, Schirmer says he immediately knew the hibiscus flavor would meld well with a nice, light, easy-drinking summer beer. "And so I brewed an American wheat-style beer and added some dried hibiscus flowers in the boil," he says.
That beer went on to win the 2012 Samuel Adams Longshot competition. It's available now (under the name James Schirmer's Beerflower Wheat) in the Samuel Adams Longshot Variety six-pack, along with the two other winners of the competition.
Keep Your Hands Away
"I showed my rookie stripes during my very first brew when I stuck my hand in the wort to retrieve the thermometer," says home-brewer Ron Perez, a CAD manager for an engineering firm in Northern Colorado.
What he did is a huge no-no because it can contaminate the brew before even getting it to the fermentation process. "When I started home brewing, I was also pretty lax about keeping all the measuring equipment sanitized and did not use an acid sanitizer to clean the fermenter," Perez says. "As a result, my first batch was a little fruity—a characteristic of contamination."
Keep a Brew Log
"I am a believer in recording data throughout the brewing process," says Scott Klym, who works as an institutional equity trader and has been home-brewing for more than two years. Why? Because if something goes wrong, a log gives him a better chance of identifying the problem and correcting it.
Klym uses a software program called Beersmith to develop recipes and record his brew day data. "I print out a brew sheet and record water volumes, temperatures at various stages, original and final gravity readings," he explains. Then he compares those to the expected values. "If there are large deviations, I can track down what caused the problem," Klym says. "For example, if my temp was too high during the mash, it would alter the original gravity and body of the beer."
Update Your Equipment
"The basic kits and ingredients available today are much better than in the past, but they have limits," says Brent Shelton, an online shopping expert and media relations specialist for FatWallet.com. For really passionate brewers, the goal is to keep improving the process and the results, so upgrading to better equipment and ingredients is a logical step toward custom brewing and possibly competing with other brewers, he says.
First, Shelton says, simply upgrading your boiling kettle will make a big difference in the mash and cook. This is especially true if you buy a glass kettle, which is superior to plastic when fermenting. He also recommends investing in a counterflow system for cooling your batch, which improves the time and accuracy of this process.
"I started out with a five-gallon pale kit from Midwest Supplies, but I've since graduated to more custom equipment, including a grain crusher, an extra burner (saves about an hour per batch), refracometer, better cleaning supplies, tubing and connectors, and an auto siphon — a must!" Shelton says. An electric all grain brewing system from www.Brew-Boss.com will also help make great consistent home brew.
So heed the advice of the experts. Whether you've been brewing for a while or just getting started, there's always room for improvisation, experimentation, and improvement.
The Hops-Boss application is completed for both Android and iOS (iPhones and iPads)!
Now you can add the Hops-Boss automated hops feeder to your existing brew kettle. The new App allows you to program hops addition times into the unit for stand-alone operation or to manually control the feeder. Purchase the hops boss feeder at http://www.brew-boss.com/product-p/hb-master.htm and download the app from the Google Play store or iTunes.
By Jeff Flowers Growing Hops Right At Home Is Easier than You Think
Home brewing is becoming increasingly popular as more and more beer lovers discover just how easy it can be to a cook up a batch of your very own creation. An integral part of the home brewing process are hops, which infuse beer with its signature flavor. While some home brewers choose to purchase hops for the brewing process, many are choosing to grow hops on there own.
Hops are the female flowers of the plant known as humulus lupulus. Hops are used as a means of flavoring beer, as well playing a role in preserving the beverage. Hops offset the sweetness of malt to create a complex flavor profile that beer lovers crave. Depending on how much and what type of hops are used will determine how bitter a beer may be.
Hops were used as a method of flavoring beer as far back as the 11th century. Before then, many brewers imparted flavor to their beer by use of a variety of herbs and flowers. The resulting brews contained far less alcohol content, and were also more susceptible to spoilage.
Today, hops are an integral part of the brewing process, with many growers taking a scientific approach to this age’s old traditional preparation. Types of Hops
There are typically two kinds of hops used in brewing. Aroma hops feature a lower acid percentage, which helps bolster the aroma of a beer. These are most commonly used as a means of finishing or conditioning a brew. Conversely, bitter hops feature a higher acid percentage. These are useful when beer is going through the boiling process.
Each of the numerous varieties of hops offers a unique flavor profile. There are many different hop varieties out there you can use to brew your beer. Here are just a few well-known hop varieties, along with a brief description of what they do for your beer:
Cascade: Cascade hops are a well-known American hop created by Oregon State University in 1956. They feature a light and citrusy flavor, such as those found in a variety of pale ales.
Bullion: Bullion hops offer a distinctly bitter flavor profile, as found in dark ales and stouts. Dominant flavors include earthy, resin-rich notes that some beer drinkers may find too strong.
Challenger: Challenger hops are a very popular English variety thanks to their dual nature. The complex flavor profile includes notes of citrus and toffee, which pairs beautifully with stronger ales.
Fuggles: Fuggles are a version of ‘wild’ hops that first came to notice in 1860s Great Britain. Upon their introduction by one Richard Fuggle (hence the name), these hops offered an earthy taste, as exemplified by such beers as English ales, porters, as well as stouts.
Columbus: Sometimes referred to as Tomahawk, this hop variety is commonly used for its bitterness.
Tips on Growing Hops
Just about anyone is capable of growing hops right in their own backyards. The process starts with procuring rhizomes, which are root segments are taken from older plants. These can be found from a number of reputable dealers all over the country. Growers can also purchase potted hops plants, which can then be planted in their home gardens.
Maintenance of hops plants is relatively easy, as they are robust enough to withstand many different environmental factors.
Planting:
It’s best to choose a sunny spot for your hops plants. You’ll also need a means of support as they grow. Hops plants climb as they get bigger, and many growers construct wire supports, which allows the hops plants to curl upward. This is recommended as some vines can grow well over twenty feet long. It’s best to plant your rhizomes at least three feet apart, at a depth of about one to two inches. Plants will grow exceedingly fast at first, with plants sometimes growing a foot per day. It’s best to do your planting early in the spring, once frost is no longer a concern. Take care when watering and fertilizing your plants; too much or too little can prove detrimental to your yield.
Harvesting:
Harvest ranges from mid-August to mid-September depending on where you’re located. When harvesting, one should be aware of what to look for to indicate whether your plants are ready. Smell is important in this capacity, as well as the look and feel of the plants. Hops will smell most pungent when ready for harvest, and they should appear light in color and feel dry to the touch when ready. Once harvested, hops should be dried before being incorporated into beer. This can be done using an oven, food dehydrator, or a self-made hop dryer.
Without the addition of hops, beer just wouldn’t be the same. Growing your own for brewing purposes can be a great experience for both master brewers as well as novices. A small home garden is all you need to take your home brewing to a new level. Planting Hops Around Your Pets
Special thanks to Brian, a commenter below, for pointing out that hops are potentially poisonous to pets. After doing someresearch, it appears that hops are indeed poisonous to both cats and dogs.
The toxicity can range from mild to severe, and depends on many factors, including the size and breed of your dog, as well as how much they ingested. Symptoms to look out for include: heavy breathing, anxiety, stomach pain, vomiting, extremely high temperatures, elevated heart rate, and in some cases, death. If you suspect your dog has ingested your homegrown hops or hop pellets, then it is highly recommended that you get them to an animal hospital immediately.
The Brew-Boss Automated Electric Homebrew System. Showing the new custom made kettle, COFI infusion filter, and the Hops-Boss automated hops dispensing device. Designed for those new to the hobby and for experienced homebrewers.
We've designed our own heating elements and had them fabricated specifically for Brew Boss. They are designed specifically for brewing. They are made from shiny, durable Stainless Steel and clean up very easily. They look brand new after each brew session. They are 100% stainless steel and will not rust! Order yours today!
by BRAD SMITH
Today we look at 10 tips for brewing better beer. These are things I wish I knew when I started homebrewing but had to learn the hard way. Enjoy!
Use High Quality, Fresh Ingredients – Fresh ingredients make better homebrew. If you started with dry yeast, move up to liquid yeast. If you are an extract brewer, look for fresh extract rather than a can that is several years old. Store liquid yeast in the refrigerator, grains in a cool dry place, and hops in the freezer. Hops, dry malt, yeast, liquid malt and crushed grains all have a limited shelf life and must be used quickly. Crushed grains, dry malt and liquid malt will oxidize over time.
Do your Homework – Designing great beer is one part science and one part art. Why guess on the science part? Switching to brewing software like BeerSmith can make a difference in your brewing as it gives you the opportunity to calculate the color, bitterness and original gravity up front to match your brewing style. As I brewed more, I started reading top brewing books, engaging in discussion forums and browsing the internet for brewing resources. All of these sources, combined with experience and experimentation dramatically impacted my brewing style and consistency in a search for brewing perfection.
Keep It Sterile – Anything that touches your beer after it has started cooling must be sanitized using any of the popular sanitizing solutions (bleach, iodophor, etc). The period immediately after you cool your beer is particularly critical as bacteria and other infections are most likely to take hold before the yeast has started fermentation.
Cool the Wort Quickly – Cooling your beer quickly will increase the fallout of proteins and tannins that are bad for your beer and will also reduce the chance of infection. An immersion wort chiller is a relatively inexpensive investment that will improve the clarity and quality of your beer. Cooling is particularly important for full batch boils.
Boil for 60-90 Minutes – Boiling your wort performs several important functions. It sterilizes your wort, vaporizes many undesirable compounds, releases bittering oils from the hops and coagulates proteins and tannins from the grains so they can fall out during cooling. To achieve all of these noble goals you need to boil for at least 60 minutes, and for lighter styles of beers a longer boil of 90 minutes is desirable.
Control Fermentation Temperature – Though few brewers have dedicated fermentation refrigerators, there are simple methods you can use to maintain a constant temperature for ales during fermentation. The best technique I’ve seen is to pick a cool, dry area in your home and then wrap the fermentor in wet towels and place a fan in front of it. Wet the towels every 12 hours or so, and you should get a steady fermentation temperature in the 66-68F range. Most brewing shops sell stick-on thermometers that can be attached to your fermentation vessel to monitor the temperature.
Switch to a Full Batch Boil – Boiling all of your wort will benefit to your beer. If you are only boiling 2-3 gallons of a 5 gallon batch, then you are not getting the full benefits of a 60-90 minute boil. The purchase of a 7-12 gallon brew pot and (highly recommended) outdoor propane burner (which will make the spouse happy as you now brew outside) are great intermediate steps for moving to all-grain brewing and the full boils will improve your beer.
Use Glass Fermenters – Glass carboys (or stainless) fermenters offer significant advantages over the typical plastic bucket. First they are much easier to clean and sterilize. Second, glass (or stainless) provides a 100% oxygen barrier, where plastic buckets are porous and can leak oxygen if stored for long periods. Third, plastic fermenters often have very poor seals around the top of the bucket and can leak in both directions making it difficult to determine when fermentation has actually completed. A 5 gallon glass carboy will do the job better, and is available at a very reasonable price from most stores.
Make a Yeast Starter – While pitching directly from a tube or packet of liquid yeast is OK, your beer will ferment better if you make a yeast starter first. Boil up a small amount of dried malt extract in a quart of water with 1/4 oz of hops. Cool it well and then pitch your yeast into it 2-3 days before you brew. Install some foil or an airlock over it and place it in a cool dark location. When brew day comes, pitching your starter will result in a quicker start and less risk of infection or off flavors.
Make Long Term Purchases – You may have started brewing with an off-the-shelf kit, but if you enjoy brewing then you are best off making long term purchases rather than a series of short term purchases. For example, early on I bought a 3 gallon pot, then a 5 gallon pot, then an 8 gallon enamel pot and finally a 9 gallon stainless. It would have been much cheaper to jump to the 9 gallon stainless after the 3 gallon pot. Similarly I’ve had several sizes of immersion chillers, finally settling on a two stage 3/8″ diameter copper coil. If you instead make long term purchases (a good pot, a good chiller, glass carboys, a nice mash tun/cooler) you will save a lot of money in the long run.
Make your plans now to visit with Brew-Boss at Brew's Up San Diego June 11-13th, 2015, the National Homebrew Conference. We are an exhibiting sponsor again this year and look forward to meeting our Facebook friends!
Registration is Now Open Membership Conference registration is open only to AHA/BA members 21 years or older.
Membership must be current at the time of registration and the event. A valid 9-digit AHA/BA member number for each registrant is required. In compliance with California state law, all attendees of the 2015 AHA National Homebrewers Conference must be American Homebrewers Association or Brewers Association members in good standing at the time of the event, June 11-13, to attend the conference.
Guests Each member registering for the Full Conference package may request ONE guest registration.
All guests must also be members of the AHA.
Guests can choose between the Full Conference or Social Package registration option.
The Social Package registration option is only available for guests of a Full Conference registrant.
Altitude Tickets Account
To complete your purchase online, you must have an account with Altitude Tickets.
If you applied to register, your account was created for you. Follow the link sent by Altitude Tickets to log into your account and finalize your payment.
If you created an account with Altitude Tickets in the past, log in with your account information.
If you do not have an Altitude Tickets account, create one.
In 1988, May 7 was announced before Congress as National Homebrew Day. The American Homebrewers Association (AHA) created AHA Big Brew as an annual event to celebrate National Homebrew Day around the world. AHA Big Brew is held each year on the first Saturday in May.
Anyone, even homebrew shops, can host and register a Big Brew event, so invite your friends and family, gather around the brew kettle and join in the global celebration of the greatest hobby there is—homebrewing!
The 2015 AHA Big Brew recipes come from three time AHA Ninkasi Award winner and current BJCP President, Gordon Strong! This year’s beers are all medal-winning recipes from Gordon’s upcoming book, Modern Homebrew Recipes, to be released in May 2015.
Columbus Pale Ale
Pale Ale is one of the most popular styles in the world. This recipe for a Columbus Pale Ale is as versatile as it is delicious! The recipe is adaptable to many other hop varieties – feel free to substitute the Columbus hops with your favorite varietal!
From Modern Homebrew Recipes: “[Columbus Pale Ale] represents the classic, old-school type of strong pale ale that was quite common in the early days of craft brewing. It uses a variety of character malts with a traditional hopping regime. It won a number of medals, along with a best-of-show at the Riverside Rumble competition in Ohio.”
The first year that the American Homebrewers Association celebrated Big Brew was in 1998. That year, the AHA encouraged homebrewers worldwide to brew a Barleywine recipe. Now we are celebrating the 19th Big Brew, and bringing Barleywine back for the first time since 1998!
From Modern Homebrew Recipes: “An American style barleywine loosely in the Sierra Nevada Bigfoot balance. Big malt and big hops make this an aggressive style. I won an NHC silver medal with a beer based on this recipe in 2010; it was a blend of mostly five year old with a little bit of one year old to freshen the hop aromatics.”
If you are looking for a way to put a twist on this Kolsch recipe, take a tip from AHA Director, Gary Glass: “I recently got together with some fellow Brewers Association staff members to brew a Kolsch. Inspired by a local brewery, we decided to make a coffee variation of the Kolsch by making a concentrated batch of cold steeped coffee that we then put in a condiment dispenser. By adding variable doses of the coffee concentrate to a glass of Kolsch, we could customize our coffee Kolsch to our own tastes.”
From Modern Homebrew Recipes: “I fell in love with this style after a visit to Cologne in 2006. I had enjoyed it before, but it didn’t seem like anything special. Trying it fresh made all the difference… The style allows for subtle changes in balance in several components (malt, hop flavor, bitterness, fruitiness), but all were hovering around moderate intensity. I won a number of NHC first round medals with this recipe, which is in the style of a Früh or Reissdorf.”
Promotional materials: if you are hosting a Big Brew event that is open to the public, use the AHA’s downloadable promotional materials to help spread the word about your gathering.
Let’s Brew: explore this section for brewing tutorials, tips on making better beer and tasty recipes.
Good news. The Brew-Boss app works wonderfully with the ANDY Android emulator and allows you to run the Brew-Boss Android app on a Windows or MAC Laptop or PC with WiFi capability! http://www.andyroid.net/
We had a user try an android emulator called Bluestacks available for Windows and MAC at www.bluestacks.com. We tried it ourselves and the Brew-Boss app works great with that emulator. If you want to control your Brew-Boss system with a Windows or MAC laptop, give it a try. You'll need to enable the text to speech in the advanced settings and download voice data, but that is very simple. The PC or laptop you use will require WiFi wireless capability, which all laptops have but few desktops do. Let us know how it works for you. Cheers!
What if you could make your own craft beer in your own home for pennies a glass? Making your own beer offers several benefits. Among them are better quality beer at a lower cost and an the ability to make “Your Beer – Your Way!” Along with this comes the pride in your own beer and the enjoyment of the craft. You can make simple light beers like the major commercial beers or craft beers that tantalize your pallet.
Many people have bad memories of homebrewed beer. You know the guy, he made his own beer and he somehow thinks it tastes good (evidently pride changes your taste buds)! So he pushes that homemade brew on you. You take one sip and have to fight wincing from the awful taste. Instead you force a smile because you don’t want to offend him. You then wait for him to look away so you can pour it down the drain. In the past, making good beer was a true art and took years of experience to master the craft. The Brew-Boss® system allows you to make beer you will love. Your friends will confirm how good it is by drinking you out of beer (based on personal experience)!
In the past, those that wanted to make their own beer went through a common growth process, often learning by failure.
First step was to visit a local homebrew store and purchase a “basic starter kit”. This kit included a couple of white plastic buckets, bucket cover, an airlock, a glass hydrometer, a siphon tube, some tubing, bottle caps a bottle capper, and maybe a how-to dvd. They might also sell you a large kettle to boil your beer in. They would then sell you an ingredient kit that included a molasses type liquid (malt extract) that you mix with water and boil in your own large kettle. These kits are available in many flavors that match various beer styles. The molasses liquid is called an extract, and is basically concentrated beer that you dilute with water. We call these“dump & stir” kits, as that is all you really are doing to make beer, similar to making Jello! These kits range in price from $30 to $50 depending on the beer style and they make 5 gallon batches. Total cost per 12oz bottle is from $0.90 to $2.10 (includes energy cost of boiling, etc. but no labor). As you can see, this is almost more than the cost of just buying a craft beer 6-pack at the local beer outlet! Also, these kits limit your creativity as you can only make recipes that the kit manufactures offer.
To reduce the cost of making beer and increase the creative juices of the brewer looking to personalize their recipes, many homebrewers advance to the 2nd step and begin partial grain brewing. With this step, the homebrewer purchases malt extracts in bulk (usually in 5 gallon buckets) and then use various grains (mainly malted barley) and other flavorings to customize their beers. This reduces the cost slightly over dump & stir kits, but increases the creative latitude of the brewer. This step requires little additional equipment over the basic beginner kits, but most homebrewers, at that point, start to upgrade their equipment as well.
Eventually, homebrewers that continue to expand, move into all-grain brewing. This reduces the cost considerably and gives infinite number of recipe possibilities. This is how the commercial breweries and microbreweries produce their beers. In a nutshell, all-grain brewing adds a step called mashing that basically converts the starches in grain (malted barley) into sugars. The mashing step is not difficult, but represents the most difficult part of brewing. Traditionally, the move to all-grain brewing required a large investment into additional equipment and knowledge. There are many different types of systems that allow you to brew all-grain. Cost of this equipment can range from simple single infusion mash cooler based systems to more advanced HERMS and RIMS based systems that cost thousands of dollars. Most of these systems are gas (propane) based and must be used outdoors. Gas based systems are costly to operate and dangerous, and most of all, don’t provide the control capability for accurate brewing.
Brew-Boss® is already an awesome product, but we want to make it even better, so good in fact it will set the bar for all other homebrew systems. Brew-Boss® is an automated homebrew system that allows the first time homebrewer to jump to All-Grain Brewing, skipping the time and costs associated with the first two steps described earlier. It requires no prior knowledge of homebrewing, but is powerful enough for advanced brewers as well. Brew-Boss® is the most automated brewing system available, talking you through every step!
Brew-Boss® has been providing electric brewing systems for over a year and is ready to jump to the next level with your backing. The existing Brew-Boss® systems are built in relatively low volumes, so taking advantage of mass production techniques is not currently viable. This increases production costs and ultimately the price to the customer.
Our goal with the new offering is to have system components purpose built in volume to reduce overall costs, making the technology available to nearly everyone. The cost of progressing through the three steps described above would exceed the cost of Brew-Boss® by several times, making Brew-Boss® the most cost effective option for all-grain brewing, To get to the next level, we need to do the following:
Create Tooling for New Brew Kettles (prototype shown in video). Currently, we expend substantial labor drilling holes in the kettles we currently use in our systems. We have made arrangements with a supplier to source kettles with holes pre-drilled and high quality welded tri-clamp fittings will be already welded by the supplier. This will eliminate the drilling labor and will provide better connections than the weldless connections used currently. This effort will require substantial financial commitments for tooling.
We have made arrangements with a manufacturer and have had custom made heating elements made just for us, out of stainless steel. The current systems we supply use off the shelf water heater elements that are susceptible to rusting and are difficult to clean. The new elements clean very easily and look like new after a brew session. Tooling for these elements in three different sizes will require a substantial financial outlay as well.
We have made arrangements to have a custom made digital temperature sensor made as well. Digital sensors are more accurate and reliable. It will be supplied with the proper plug to match or controller. Our current design requires labor on our part as we have to manually add the proper plug to the sensor.
The COFI filter shown in the video and pictures is a prototype. We need to work with the manufacture to tool up for high production numbers. We have tested the design and are getting better efficiency than using mesh bags. We are excited to add this unit to our offering.
The goal of this campaign is to allow us to fund the engineering, tooling, and other development costs to have our own custom designed kettles, heaters, control boxes, etc. manufactured for us rather than using off the shelf items from other suppliers. Tooling for our own products will allow us to reduce our component and labor costs, ultimately reducing the cost to the consumer.
We also want to port the Android Application over to the IOS platform. This represents a major effort as the Android application has nearly 2000 hours of development and testing time to date.
Brew-Boss® is available in many sizes and configurations. Basically, you choose the size of your kettle, the voltage you desire, and the mash method (Mesh Bag or COFI Filter).
Complete 240VAC 15 Gallon System
Standard kettles are 10, 15, and 20 gallon capacity. The 10 gallon system makes 5 gallon or smaller batches. The 15 gallon system is capable of 10 gallon or smaller batches, The 20 gallon system is capable of 10 to 15 gallon batches.
Systems are available in two different voltages, 120 volts and 240 volts.
The 120 volt system requires two separate 15 amp circuits in your home and will only work with the 10 gallon kettle as there simply is not enough electrical heating capacity (3000 watts total) to heat more water to that to a boil.
The 240 volt system is available in all three kettle sizes in 3500 watt or 5500 watt options. The 3500 watt version is designed for international customers that have 20 amp limitations on their 220-240 volt circuits. The 3500 watt can also be used in the 10 gallon kettle option for USA customers, but is not recommended for the larger 15 or 20 gallon kettles. The 5500 watt heater option requires a 240 volt 30 amp circuit and is the most powerful (fastest) heating option.
A pump is also supplied for recirculating the wort in the kettle during the mash process. All stainless steel fittings and high temperature brewery grade hoses are also supplied.
Everything fits inside the kettle, so storage is simple. Place everything inside the kettle and stow in a closet.
The basic Brew-Boss® system is a Brew-In-A-Bag (BIAB) system that utilizes a mesh bag to contain the grains inside the kettle during the brewing process. The entire brewing process occurs in a single kettle.
The basic brewing process is as follows:
Fill the kettle with the appropriate amount of water.
The controller heats the water to a starting temperature called the strike temperature.
Add the Grains to the kettle in the mesh bag or COFI filter.
The controller holds the temperatures for predetermined amounts of time while recirculating with the pump.
Remove the grain bag or COFI filter.
The controller boils the contents for the predetermined amount of time. You add hops at the appropriate times or the Hops-Boss device adds them automatically.
You cool the contents to room temperature using a chiller.
Transfer the contents of the kettle to a fermenter.
Add Yeast
Install Air Lock on fermenter.
When bubbling stops (about 1 week), remove sediment.
Wait another week for fermentation to complete and sediment to settle out.
Transfer to keg.
Chill and carbonate.
The bag is simply removed before the boil after the sugars are extracted from the grains.
Mesh Bag Installed on Kettle
The new Brew-Boss® Advanced system uses a newly designed, patent pending, infusion filter we call the COFI Filter. COFI is an acronym for Center Out Forced Infusion. This design uses a special stainless steel mesh filter, instead of a mesh bag, to contain the grains during the mash cycle. It provides better saturation of the grains as well as some other benefits.
COFI Filter Unit
The COFI filter unit also has a central infusion tube that has flow matched holes that force recirculated water through the grains from the center of the filter. This increases the efficiency of the mash process.
Spray Pattern of Central Infusion Tube
The COFI filter also has a unique false bottom that compresses the grains when the filter is being removed by lifting from the central infusion tube. The squeezing action forces much of the left over sweetness out of the grains.
Squeezing Action on Wet Grains
For both the BIAB and COFI versions, a high temperature brew pump is used to recirculate the water in the kettle during the mash process.
The Brew-Boss® controller is equipped with its own internal wireless wi-fi router and hardware to drive the high current heating element and a pump. A digital temperature probe plugs into the controller to allow monitoring of the kettle temperature.
The system uses the Android tablet platform as it provides voice capability as well as excellent control capability. It is planned to port the app to IOS in the future.
Android Application Screen Showing Temperature Profile Graph for Complete Brew Session
The Brew-Boss Android app connects wirelessly to the Brew-Boss® controller and does all the heavy lifting to control all aspects of the brew system. It also provides the ability to customize the brew process.
The Hops-Boss is an automatic pellet hops feeder that interfaces wirelessly to the Brew Boss controller and allows you to dispense up to seven (7) different hops additions at the times you specify during the brew session. It can also be used to dispense other finings such as Irish Moss, etc. Never miss a hops addition again!The Hops-Boss is constructed from 304 Stainless Steel with specially machined plastic Hops-Cups (we call them Mortar Shells) and simply sits on the edge of nearly any kettle. Each cup holds about 1.75 oz of pellet hops or over 3/4 lb for all 7 cups!
Android Application Screen Showing Temperature Profile Graph for Complete Brew Session