BREW-BOSS COFI MASH INFUSION FILTER FOR 15 GALLON KETTLE

BREW-BOSS COFI MASH INFUSION FILTER FOR 15 GALLON KETTLE Center Out Forced Infusion The Brew-Boss #COFI filter is an exciting technology that optimizes the efficiency of Brew-In-A-Bag (#BIAB) type brewing. The filter is manufactured from 304 grade stainless steel mesh which holds the grain during the mash process, but allows water to flow through. The filter is 13 inches in diameter x 13.5 inches high. The support legs allow the filter to sit above the heating element and are 2-1/2 inches tall. This brings the total height of the unit to 16 inches. The 90 degree barbed elbow at the top adds another 1-1/2 inches, for a total overall height of this filter with the barbed fitting installed of 17.5 inches. Make certain your kettle is tall enough to contain this filter with the cover on. The filter can hold approximately 20 pounds of crushed grain. This amount depends on the crush and the grain. This item is provided for brewers to add to their existing (Brew-Boss or other Manufacturer) breweries and includes the following items: Mesh basket with 2.5" long feet to clear heating element. Mesh Cover with Stainless Steel Clamps and Handle Center Infusion Tube False Bottom with Threaded Infusion Tube Mount Stainless Elbow Fitting for Top of Infusion Tube Stainless Lift Ring Adapter Type C Camlock Female Fitting 12" Silicone Brewery Grade Tubing A central infusion tube, that is perforated with a series of flow-matched holes, extends all the way to the bottom of the filter. During the mash cycle, water is continuously pumped from the bottom of the kettle to the top of the filter, into the central infusion tube, where it is forced through the grain bed. Water passing through the grain bed flows out of the filter to the bottom of the kettle. This Center Out Forced Infusion (COFI) technology assures that all the grain is in constant contact with the mash water and that there are no dead spots. No stirring is required as the system is self agitating and efficiency is thereby optimized. The COFI filter is also very easy to clean, simply invert it in a sink and spray it with your sprayer! Because it is made of stainless steel, it will not rust and will last indefinitely. The central infusion tube is also connected to a false bottom. After mashing is completed, the elbow fitting at the top of the COFI filter is exchanged with a lifting ring. When removing the filter, the filter is lifted by the lift ring. This brings the false bottom towards the fixed cover, allowing the weight of the filter to squeeze the grain. This squeezing action extracts much of the trapped sweet wort from the grain. www.brew-boss.com

240 Volt Brew-Boss Electric Brewery Controller Version 3

https://www.brew-boss.com/Brew-Boss-240-Volt-Electric-Brewery-Controller-V3-p/bb240-diy-v3.htm



240 Volt Brew-Boss Electric Brewery Controller Version 3

Brew-Boss V3 electric brewing controller. This option is for those that already have a gas based brewing system and want to convert to the benefits of electric brewing or want to create their own electric brewery.

This newly designed controller replaces our previous controller. It includes the following features:

● Molded L6-30P Twist Lock Plug with 15’ power cord.
● L6-30R Receptacle for the heater. This allows longer length cables to be used for connecting to the heater.
● New 20 character x 4 line Backlit LCD provides more information on the Controller. Especially nice for fermentation mode.
● Integrated wifi radio for connection to the Brew-Boss Android tablet app.
● Front mounted outlet for the pump (controlled by app) and “always on” outlet for the tablet charger.
● Front mounted temperature probe jack.
● Can be wall mounted or simply placed on a table or work surface.
● Universal voltage (208-240VAC) works in most countries.
● Industrial lockable rotary master switch is front mounted for easier access.
● Custom designed DUAL SSR for reliable heater and pump operation.

The new V3 controller includes the following improvements over previous versions:

New 32-bit processor is faster and more powerful than previous versions
Robust WiFi integrated into the controller with easier configuration for home and office networks
Automatic firmware updates over the web when controller connected to internet
Added a rotary input switch that allows users to:

• - Manually control brewing functions right on the controller
• - Control fermentation
• - Brew without the need for the companion Android App
• - Set temperature setpoints for the controller to hold automatically
• - Set a countdown timer
• - Control and Configure the Hops-Boss and Accu-Fill devices
• - Set brewing parameters

New accessory port that allows the Hops-Boss and Accu-Fill devices to be plugged in and automatically recognized by the controller.
Added menu functions that allow setting of operational parameters

The controller is universal for all countries that have 208-240 volt power. No separate 120 volt input is required for the USA when used with our new universal voltage DC pumps. (Note, this controller only works with 208-240 volt pumps!). The new controller also has a dedicated always on 240 volt receptacle for powering/charging the tablet! If you want to use the controller with a 120 volt pump, you will need to purchase an appropriately sized transformer device to step the voltage down for your pump. We recommend this unit or similar.

This controller requires a 208-240 Volt 30 Amp circuit with a GFI breaker installed to operate. A digital temperature probe is included with this controller. The controller is shipped with a L6-30R twist lock receptacle for a heater that mates to the Brew-Boss integrated elements. If you have a different heater, you can simply add a L6-30P plug to your heater. The L6-30R connector provided also matches the Blichmann Engineering Boil-Coil.

https://www.brew-boss.com/Brew-Boss-240-Volt-Electric-Brewery-Controller-V3-p/bb240-diy-v3.htm

Your Beer, Your Way!  Brew Boss

www.brew-boss.com

#electricbrewcontroller, #electricbrewing, #homebrewing, #brewboss, #controller, #brewcontroller

Brew Boss Tips and Tricks - Cleaning the FastFerment Ball Valve

How to properly clean the ball valve on a FastFerment fermenter by Brew-Boss.

If you are unfamiliar with the Brew-Boss® homebrew system home brew system, it is an all electric home beer brewing system that allows home brewers to brew extract or all-grain recipes with complete and accurate automatic control of temperature and timing. Automated control provides consistent results every time. No other system available offers this level of automated brew control. It actually talks you through the brew process.

Your Beer, Your Way!

Brew like a boss!

www.brew-boss.com

#brewyourownbeer,#homebrewing,#brewboss

Brew Boss App Video - Add Hops

Adding hops is easy with the Brew Boss App!  

Your Beer, Your Way!  Brew Like a Boss!

www.brew-boss.com

Fill-Boss Counter Pressure Bottle/Growler Fillers & Equipment

Available from Brew BossCounter Pressure Bottle/Growler Fillers & Equipment

http://www.brew-boss.com/category-s/159.htm

FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER

Fill-Boss is the first "Automated" counter pressure bottle filler that is affordable enough to be purchased by home brewers but strong and fast enough to be used by nano and micro brewery operations as well. It is built like a tank from laser cut and formed 12 gauge 304 stainless steel. Fill-Boss is microprocessor controlled, so it fills bottles and growlers to exactly the right level every time, just by pressing one button! The simple design can be used for nano and microbrewery operations as well as brew-pubs that want to add inexpensive bottling and growler filling to their operations.

The innovative spring loaded adjustment system can adjust to most bottle sizes, including 1.5l wine bottles and growlers!

• Spill free automated counter pressure filling. 
• Handles bottles from 8 to 14 inches tall and 5 inches in diameter. 
• Maximum fill pressure is 30 psi for standard beer/wine bottles. Max pressure is lower for growlers and other vessels with larger openings. 
• Handles bottles with openings from 0.75" to 1.25" with supplied silicone bottle seal (larger sizes with standard drilled rubber stoppers - not included see description below) 
• Bottle non-carbonated or fully carbonated beverages from 5 Gallon Cornelius Kegs (Cornelius Keg, CO2 tank, and regulator required but not included) or from your brite tank or other storage vessel. (Note: This device does not actually carbonate your beverage. It allows you to fill bottles and growlers with a carbonated beverage with minimal foaming or losing carbonation) 
• Programmable Fill Speed. 
• Includes Ball Lock connectors and tubing for Ball-Lock Cornelius kegs or 1/4" NPT Threaded Quick Connect fittings for connecting to other vessels. 
• Contact us for special connections for Sanke Kegs and Brite Tanks. We will find a way to connect to your vessel! 

We've received calls from a prospective customers asking "what is wrong with these units?" Why are they 1/3 the cost of other automatic fillers? The reason Fill-Boss is less costly than other options is that it was designed from the ground up to be an affordable and reliable filler. We use the Fill-Boss in our brew-on-premise operation daily and it has never hiccuped! One Fill-Boss commercial customer reports a 3-1/2 day payback when he switched to Fill-Boss! Yes, it is for real!

If you need more than one filler unit, we offer quantity discounts automatically applied.

1 or 2 units = list price

3 or 4 units = 10% discount

5+ units = 15% discount

There are several connection options to allow you to use the Fill-Boss with various beverage vessels. The Fill-Boss requires two connections, one for the CO2 (gas) supply and the other for the beverage. It is important that the pressure on the gas line match the pressure in the beverage vessel.

We have standardized on the Ball-Lock type connectors for the Fill-Boss as they are quick connect/disconnect and are self sealing with integrated valves (See Ball-Lock Post Adapters Option Below). Ball lock connections are included with every Fill-Boss unit but we offer other connection options as described below.



http://www.brew-boss.com/Fill-Boss-Counter-Pressure-Bottle-Filler-p/fill-boss.htm























We also offer a Multi-Filler Kit that allows up to 4 Fill-Boss Fillers to be ganged off a common source. Most commercial operations have from 2 to 4 fillers ganged together to increase production. We have found that we can fill about 2 cases of standard 12 ounce bottles in 20-30 minutes with 2 people and two fillers. One person fills and the other caps, labels, wipes, and places in case. We have a customer filling 22 ounce bomber bottles and they report being able to do 1 case (12 bottles) every 10 minutes with 2 fillers and 2 people.


http://www.brew-boss.com/Fill-Boss-Counter-Pressure-Bottle-Filler-p/fill-boss.htm

#counterpressurebottlegrowlerfiller, #brewboss #electricbrewingequipment

Tri-Clamp Pickup Tube

Buy Now:
Tri-Clamp Pickup Tube

by BREW-BOSS www.brew-boss.com

This durable Tri-Clamp pickup tube is constructed of beautiful polished 304 stainless steel. It attaches directly to the Tri-Clamp ferrule on the Brew-Boss kettle using a Tri-Clamp gasket and Tri-Clamp Clamp (gasket and clamp not included). It allows you to drain nearly all of the wort out of your kettle without tipping the kettle and disrupting the trub on the bottom. Mount this between your kettle and valve or between your kettle and pump. Includes pick-up tube with 1.5" Tri-Clamp ferrules.

http://www.brew-boss.com/1-5-Tri-Clamp-Pickup-Tube-p/tc-pickuptube.htm

#homebrew

Happy St. Patrick's Day from Brew Boss!!

You don't need the luck of the Irish to make great beer.  Brew-Boss Electric Brewing Systems help you make consistently great beer.  Get one today!! 

 www.brew-boss.com

#homebrew, #thebeernation, #brewbossbrewing

Brew-Boss Product Release: Stainless Steel Ripple Heating Element

#Brew-Boss introduces it's newest product! We have developed a stainless steel #ripple heating element that has an integrated L6-30P plug and a 1.5 inch Triclamp ferrule. The element is ULWD, 5500 watts, 240 volts. We also have 120 volt 1500 watt foldback elements as well with teh same L6-30P and Triclamp ferrule. This element eliminates the issues when trying to build your own electric brewing system related to how to connect the wires to the element and properly enclose the connections and properly ground the element. This element solves all those problems. All you need to do is add an L6-30R receptacle on your controller and install a 1.5" triclamp ferrule on your kettle. Of course the Brew-Boss kettles and controllers are natural mates to this heater!


Order yours today!
http://www.brew-boss.com/ULWD-L6-30P-Stainless-Steel-Ripple-Heater-Element-p/htr-5500-ripple-l6-30p.htm


www.brew-boss.com

#electricbrewing #homebrew #brewboss