Back in Stock - FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER (VERSION 3)

  Available from Brew Boss Counter Pressure Bottle/Growler Fillers & Equipment

FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER (VERSION 3)

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm

FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER

Fill-Boss is the first "Automated" counter pressure bottle filler that is affordable enough to be purchased by home brewers but strong and fast enough to be used by nano and micro brewery operations as well. It is built like a tank from laser cut and formed 12 gauge 304 stainless steel. Fill-Boss is microprocessor controlled, so it fills bottles and growlers to exactly the right level every time, just by pressing one button! The simple design can be used for nano and microbrewery operations as well as brew-pubs that want to add inexpensive bottling and growler filling to their operations.

The innovative spring loaded adjustment system can adjust to most bottle sizes, including 1.5l wine bottles and growlers!

• Spill free automated counter pressure filling. 
• Handles bottles from 8 to 14 inches tall and 5 inches in diameter. 
• Maximum fill pressure is 30 psi for standard beer/wine bottles. Max pressure is lower for growlers and other vessels with larger openings. 
• Handles bottles with openings from 0.75" to 1.25" with supplied silicone bottle seal (larger sizes with standard drilled rubber stoppers - not included see description below) 
• Bottle non-carbonated or fully carbonated beverages from 5 Gallon Cornelius Kegs (Cornelius Keg, CO2 tank, and regulator required but not included) or from your brite tank or other storage vessel. (Note: This device does not actually carbonate your beverage. It allows you to fill bottles and growlers with a carbonated beverage with minimal foaming or losing carbonation) 
• Programmable Fill Speed. 
• Includes Ball Lock connectors and tubing for Ball-Lock Cornelius kegs or 1/4" NPT Threaded Quick Connect fittings for connecting to other vessels. 
• Contact us for special connections for Sanke Kegs and Brite Tanks. We will find a way to connect to your vessel! 

We've received calls from a prospective customers asking "what is wrong with these units?" Why are they 1/3 the cost of other automatic fillers? The reason Fill-Boss is less costly than other options is that it was designed from the ground up to be an affordable and reliable filler. We use the Fill-Boss in our brew-on-premise operation daily and it has never hiccuped! One Fill-Boss commercial customer reports a 3-1/2 day payback when he switched to Fill-Boss! Yes, it is for real!

If you need more than one filler unit, we offer quantity discounts automatically applied.

1 or 2 units = list price

3 or 4 units = 10% discount

5+ units = 15% discount

There are several connection options to allow you to use the Fill-Boss with various beverage vessels. The Fill-Boss requires two connections, one for the CO2 (gas) supply and the other for the beverage. It is important that the pressure on the gas line match the pressure in the beverage vessel.

We have standardized on the Ball-Lock type connectors for the Fill-Boss as they are quick connect/disconnect and are self sealing with integrated valves (See Ball-Lock Post Adapters Option Below). Ball lock connections are included with every Fill-Boss unit but we offer other connection options as described below.

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm
























We also offer a Multi-Filler Kit that allows up to 4 Fill-Boss Fillers to be ganged off a common source. Most commercial operations have from 2 to 4 fillers ganged together to increase production. We have found that we can fill about 2 cases of standard 12 ounce bottles in 20-30 minutes with 2 people and two fillers. One person fills and the other caps, labels, wipes, and places in case. We have a customer filling 22 ounce bomber bottles and they report being able to do 1 case (12 bottles) every 10 minutes with 2 fillers and 2 people.

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm

#counterpressurebottlegrowlerfiller, #brewboss #electricbrewingequipment

 Available from Brew Boss Counter Pressure Bottle/Growler Fillers & Equipment

FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER (VERSION 3)

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm

FILL-BOSS COUNTER PRESSURE BOTTLE AND GROWLER FILLER

Fill-Boss is the first "Automated" counter pressure bottle filler that is affordable enough to be purchased by home brewers but strong and fast enough to be used by nano and micro brewery operations as well. It is built like a tank from laser cut and formed 12 gauge 304 stainless steel. Fill-Boss is microprocessor controlled, so it fills bottles and growlers to exactly the right level every time, just by pressing one button! The simple design can be used for nano and microbrewery operations as well as brew-pubs that want to add inexpensive bottling and growler filling to their operations.

The innovative spring loaded adjustment system can adjust to most bottle sizes, including 1.5l wine bottles and growlers!

• Spill free automated counter pressure filling. 
• Handles bottles from 8 to 14 inches tall and 5 inches in diameter. 
• Maximum fill pressure is 30 psi for standard beer/wine bottles. Max pressure is lower for growlers and other vessels with larger openings. 
• Handles bottles with openings from 0.75" to 1.25" with supplied silicone bottle seal (larger sizes with standard drilled rubber stoppers - not included see description below) 
• Bottle non-carbonated or fully carbonated beverages from 5 Gallon Cornelius Kegs (Cornelius Keg, CO2 tank, and regulator required but not included) or from your brite tank or other storage vessel. (Note: This device does not actually carbonate your beverage. It allows you to fill bottles and growlers with a carbonated beverage with minimal foaming or losing carbonation) 
• Programmable Fill Speed. 
• Includes Ball Lock connectors and tubing for Ball-Lock Cornelius kegs or 1/4" NPT Threaded Quick Connect fittings for connecting to other vessels. 
• Contact us for special connections for Sanke Kegs and Brite Tanks. We will find a way to connect to your vessel! 

We've received calls from a prospective customers asking "what is wrong with these units?" Why are they 1/3 the cost of other automatic fillers? The reason Fill-Boss is less costly than other options is that it was designed from the ground up to be an affordable and reliable filler. We use the Fill-Boss in our brew-on-premise operation daily and it has never hiccuped! One Fill-Boss commercial customer reports a 3-1/2 day payback when he switched to Fill-Boss! Yes, it is for real!

If you need more than one filler unit, we offer quantity discounts automatically applied.

1 or 2 units = list price

3 or 4 units = 10% discount

5+ units = 15% discount

There are several connection options to allow you to use the Fill-Boss with various beverage vessels. The Fill-Boss requires two connections, one for the CO2 (gas) supply and the other for the beverage. It is important that the pressure on the gas line match the pressure in the beverage vessel.

We have standardized on the Ball-Lock type connectors for the Fill-Boss as they are quick connect/disconnect and are self sealing with integrated valves (See Ball-Lock Post Adapters Option Below). Ball lock connections are included with every Fill-Boss unit but we offer other connection options as described below.

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm
























We also offer a Multi-Filler Kit that allows up to 4 Fill-Boss Fillers to be ganged off a common source. Most commercial operations have from 2 to 4 fillers ganged together to increase production. We have found that we can fill about 2 cases of standard 12 ounce bottles in 20-30 minutes with 2 people and two fillers. One person fills and the other caps, labels, wipes, and places in case. We have a customer filling 22 ounce bomber bottles and they report being able to do 1 case (12 bottles) every 10 minutes with 2 fillers and 2 people.

https://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm

#counterpressurebottlegrowlerfiller, #brewboss #electricbrewingequipment

Fill-Boss Pro Automated Bottle Filler and Capper - Perfect for Nano Breweries

Fully automated counter pressure bottle filler and capper for beer and other carbonated beverages. 

Key Features: 

- Handles nearly every size beverage bottle that uses crown caps 

- Foam free counter pressure filling of carbonated beverages 

- Automated cap feeder and capper 

- Automated bottle sanitizing prior to fill

 - Small footprint - Low product waste 

- Very low cost relative to other systems available 

- Perfect for start-up nano and micro breweries

The Fill-Boss Pro uses counter pressure fill technology.  This means that the bottle is pressurized to the same pressure as the beverage tank (keg or brite tank) prior to filling.  Typically the bottle is purged of oxygen (air) by filling it first with CO2 until all the air is forced out.  CO2 is heavier than air so when introduced to the bottle, the CO2 settles to the bottom.  After the air is purged, the bottle is pressurized with CO2 until the pressure reaches the same pressure as the beverage keg or brite tank.  Flow of beverage is then allowed to flow into the bottle and pressure is gradually released from the bottle allowing the CO2 to escape and beverage to replace it.  This process of filling under pressure reduces foaming greatly. 

The filler is completely adjustable, allowing it to fill nearly any crown cap type bottle.  The innovative fill head design on the Fill-Boss Pro dispenses the beverage along the inside walls of the bottle, further preventing foaming and increasing flow rates of beverage.

One of the KISS features of the Fill-Boss Pro is the ability to invert the bottles beneath the indexing conveyor.  This was made possible by an innovative linkage mechanism that clamps the bottles, regardless of the diameter, exactly in the center of the conveyor link.  This is required to assure alignment with the fill head, capper, and sanitizer.  This bottle clamp design automatically releases at the load/unload position allowing the user to easily remove filled bottles and replace them with an empty bottle.  When the conveyor indexes, the bottle is automatically clamped and eventually conveyed to the underside of the conveyor.

The prototype also does not show the automated sanitizing feature of the machine. The computer models shown below show the unique dual tray feature that allows us to sanitize the bottles automatically as they are inverted under the conveyor.  The lower tray is filled with sanitizing solution.  When the inverted bottles pause above the sanitizing positions, the high pressure pump forces a jet of sanitizer into the bottle(s).  The upper tray captures any drips coming from the filler itself and keeps contaminants out of the sanitizer.

We've spent considerable time developing a cap feeder that we have not shown in this video as it is so unique, we don't want to risk others copying the design before we get this to market!  The prototype shows the magnetic capping head, but as the prototype was designed to test the reliability of the system, we excluded showing the actual capping as the bottles are simply emptied when they get inverted and filled again when they are presented to the filler.  That allowed us to stress test the system without the need to remove caps.  

We've found the maximum fill rate to be about 120 bottles per hour per fill head, so the 2 head would be 240 bottles/hr and the 4 head 480 bottles/hr.  This is the maximum rate and should only be expected for non-carbonated beverages or low foam beverages.  The fill rate is decreased for beverages that foam considerably as the bottles must be filled slower. 

Single Fill Head Design

Dual Fill Head Design

4 Fill Head Design

www.brew-boss.com

Your Beer, Your Way!! Brew like a Boss! 

#nanobrew, #fillboss, #automatedbottlefillerandcapper, #counterpressurebottlefiller, 

New! Brew Boss Releases - Fill-Boss V3 Counter Pressure Bottle and Growler Filler

New! Brew Boss Releases - Fill-Boss V3 Counter Pressure Bottle and Growler Filler

The long awaited Fill-Boss is here!!!

Click link to order now:
http://www.brew-boss.com/Fill-Boss-V3-Counter-Pressure-Bottle-Filler-p/fill-bossv3.htm


Fill-Boss is the first "Automated" counter pressure bottle filler that is affordable enough to be purchased by home brewers but strong and fast enough to be used by nano and micro brewery operations as well. It is built like a tank from laser cut and formed 12 gauge 304 stainless steel. Fill-Boss is microprocessor controlled, so it fills bottles and growlers to exactly the right level every time, just by pressing one button! The simple design can be used for nano and microbrewery operations as well as brew-pubs that want to add inexpensive bottling and growler filling to their operations.

This is our latest release Version 3! This third generation filler has been completely redesigned with a new control board that utilizes the latest 32-bit processor technology as well as adds an LCD display that allows a much more user friendly interface for setting parameters and options. A simple to use rotary button allows all functions to be easily configured using a simple menu system displayed on the LCD. Even more exciting is the new automatic bottle detection system that detects when you load a bottle and starts filing automatically, eliminating the need to press the button each time a bottle is loaded. This is a great feature which improves productivity, especially when using multiple units in parallel. The new filler also uses new electric valve designs with Viton seals that are more resilient to acidic and caustic beverages as well as provide faster fills.

New Version 3 Features

• 32-Bit Processor with future wi-fi capability
• 16 character x 2 line LCD display provides needed information during filing and allows easier configuration of operating parameters.
• Rotary push button switch provides a great user interface for setting parameters and controlling the filler.
• Auto bottle detection feature automatically starts filling when bottle inserted.
• Improved bottle fill detection circuit for more reliable auto fill operation.
• Stronger spring allows for higher operating pressures.
• New valve designs are more resilient to acidic and caustic beverages.
• Faster fill speeds with higher flow beverage valve.

The innovative spring loaded adjustment system can adjust to most bottle sizes, including 1.5l wine bottles and growlers!

Fill-Boss Features and Benefits

• Spill free automated counter pressure filling.
• Handles bottles from 8 to 14 inches tall and 5 inches in diameter.
• Maximum fill pressure is 30 psi for standard beer/wine bottles. Max pressure is lower for growlers and other vessels with larger openings.
• Handles bottles with openings from 0.75" to 1.25" with supplied silicone bottle seal (larger sizes with standard drilled rubber stoppers - not included see description below)
• Bottle non-carbonated or fuly carbonated beverages from 5 Gallon Cornelius Kegs (Cornelius Keg, CO2 tank, and regulator required but not included) or from your brite tank or other storage vessel. (Note: This device does not actually carbonate your beverage. It allows you to fill bottles and growlers with a carbonated beverage with minimal foaming or losing carbonation)
• Programmable Fill Speed.
• Includes Ball Lock connectors and tubing for Ball-Lock Cornelius kegs or 1/4" NPT Threaded Quick Connect fittings for connecting to other vessels.
• Contact us for special connections for Sanke Kegs and Brite Tanks. We will find a way to connect to your vessel!

We've received calls from a prospective customers asking "what is wrong with these units?" Why are they 1/3 the cost of other automatic fillers? The reason Fill-Boss is less costly than other options is that it was designed from the ground up to be an affordable and reliable filler. We use the Fill-Boss in our brew-on-premise operation daily and it has never hiccuped! One Fill-Boss commercial customer reports a 3-1/2 day payback when he switched to Fill-Boss! Yes, it is for real! 

Your Beer, Your Way!

Brew like a Boss!

www.brew-boss.com

#fillbossversion3,#counterpressurebottlefiller,#affordablegrowlerfiller,#brewboss