DO IT YOURSELF BREW-BOSS "BRAIN" KIT - Electric Brew Controller

http://www.brew-boss.com/product-p/bb-brain.htm

For the Do-It-Yourselfer, purchase the "Brains" of the Brew-Boss controller. Add it to your existing electric brewery panel or start from scratch. A cost effective way to enjoy the benefits of the Brew-Boss system.

THIS KIT INCLUDES THE FOLLOWING:

• ARDUINO TYPE BOARD PRELOADED WITH THE BREW-BOSS FIRMWARE 
• BREW-BOSS CONTROL SHIELD WITH: 
• WI-FI INTERFACE MODULE 
• OUTPUTS FOR HEATER ELEMENT AND PUMP TO BE CONNECTED TO YOUR SOLID STATE RELAYS 
• TEMPERATURE PROBE PORT 
• ALARM BEEPER 

• DIGITAL TEMPERATURE PROBE 
• 12 DIGIT LCD SCREEN AND CABLE 
• BREW-BOSS PANEL OVERLAY FOR LCD 
• USB CABLE 

To use this kit you will need to supply your own wiring, solid state relays, water-tight cable glands, master power switch, and the control enclosure of your choosing. The black and red wires on the controller are for the heater and the green and black wires are for the pump. Both must be connected to solid state relays appropriately sized for the heater and pump wattage you will be controlling. An appropriate heat sink should be used as well.

We are offering this kit for those that already have created or want to create their own electric brewery control panels. No assistance will be provided by us in the design or implementation of the Brew-Boss controls other that support of the controller itself. Those purchasing this option should be familiar with high voltage wiring and control circuits.

Note: We no longer sell Android Tablets with our systems. You will need an Android Tablet to run the Brew-Boss app on. We recommend a 10.1" screen or larger. The app is not designed for phones.

Warning - Shock Hazard!

This is an all electric system. It eliminates the many dangers associated with gas fired systems, but working with electricity is dangerous. You can be seriously injured or worse die by electricity. This system requires that you provide a 240VAC 30 AMP circuit and the appropriate power plug. A ground fault interrupter is highly recommended. If you are not comfortable or not knowledgeable with electrical wiring please have a certified electrician wire your system.

*** By ordering this product, you accept all liabilities for any and all damages that may occur by your usage of this equipment. Further you agree to install all equipment in accordance with your local codes and regulations as required.

Your Beer, Your Way!  Brew Like a Boss!

www.brew-boss.com

#electrichomebrewcontroller,#brewboss,#beer