BREW-BOSS PRO CONTROLLER WITH HOPS-BOSS INTERFACE (DRIVES TWO 5500 WATT HEATERS. HEATERS AND CABLES NOT INCLUDED)
Brew-Boss Pro Controller
The Brew-Boss Pro controller requires a 240 Volt 50 Amp GFCI circuit. The controller has two (2) 240 Volt output receptacles that connect to Brew-Boss Heater assemblies. It also has a 120 volt AC application controlled receptacle for the supplied pump. An additional 120 volt always on receptacle is provided for powering/charging the control tablet. Jacks are also provided for the digital temperature probe and the Hops-Boss Pro. We include a 10" Android Tablet with the Brew-Boss application installed for you.
The Brew-Boss PRO controller is supplied with a 10 foot long, 4 conductor, 6 gauge cable for powering the unit with 240 Volts AC. It is highly recommended that you install a Ground Fault Interrupter (GFI) type breaker on the circuits you will be plugging/wiring the Brew-Boss Pro controller into. The controller is built with all UL Recognized components to UL standards, but currently is not UL certified and does not bear the UL logo. We can have the controller UL certified if required by your local electrical/building inspector for commercial installations (additional fees apply, contact us for more information).
The controller has a 20 character x 4 line back-lit LCD display that displays pertinent operational data.
The Pro series controller also includes a manual menu selector that allows the controller to be used in a manual mode when not connected to the Brew-Boss app. This menu allows the following functions:
- Set temperature setpoint (controller will hold that temperature)
- Toggle the pump on or off
- Set the heater power output (will hold that power regardless of temperature)
- Set the Hops-Boss Position
- Start or stop Fermentation Mode
- Set Heating Parameters
- Set a Timer
Order yours today!!
No comments:
Post a Comment