Brew-Boss Electric Home Brewing: November 2020

Wednesday, November 18, 2020

2020 Black Friday Sale - Brew Boss 15 Gallon Kettle and Filter Only $199

2020 Black Friday Special ONLY $199

15 GALLON KETTLE AND FILTER
LIMITED QUANTITIES

Here is your chance to pick up a genuine 15 Gallon Brew-Boss kettle with the matching patented COFI filter at below factory cost! This is our best Black Friday special ever. Note that the COFI filter does not include the center infusion tube or hose assembly. These are close-out filters that were received from the factory without those items and we do not have those items available.

https://www.brew-boss.com/Brewing-Filter-Clearance-p/2020blackfridaykettlefilter15.htm

The Brew-Boss Kettles have Welded 1-1/2" Tri-Clamp ferrules for a heater and valve or pump. The kettle also includes a Cover, Camlock Accessory Port, and Direct Contact Weldless Temperature Probe Mount. Includes etched volume markings in both Gallons and Liters.

These are optimum 1.2:1 ratio kettles!

15 Gallon Kettle Dimensions - 400mm Dia x 480mm H (15.75 in x 18.9 in)This special includes our clearance/closeout COFI filter. You will not find a lower price on brewing filters of these sizes. We received these COFI filters from the factory without center infusion tubes, so we are selling them at a deep discount without the center infusion tubes. Our loss is your fortune!

You can use this kettle and filter in the traditional Brew-In-A-Basket (BIAB) fashion as is. If you want to use it with the benefits of our patented (Patent Number US10400200B1) COFI (Center out forced infusion) filter system, you will need to fabricate your own center infusion tube. We do not have these available for sale.

The center infusion tube is a tube that has multiple holes drilled to distribute the mash water into the center of the grain bed during mashing (see photo diagram of the concept). There are 1/2" Male Pipe Threads on both ends, one end threads into the false bottom and the other end is used to attach a lifting ring that when lifted causes the false bottom to squeeze the remaining liquid out of the grains. If you want to make your own, the 15 gallon filter version tube is 13 inches long.

The 13 inch filter is 13 inches in diameter x 13.5 inches high. The support legs allow the filter to sit above the heating element and are 2-1/2 inches tall. This brings the total height of the unit to 16 inches.

This item includes the Kettle, Kettle Cover, Weldless Temperature Probe Mount, Camlock Accessory Port, Filter Body, Filter Cover, Locking Handle (doubles as lift handle), and False Bottom for Filter. It DOES NOT INCLUDE THE CENTER INFUSION TUBE OR RUBBER FEET FOR THE FILTER!

You can order the rubber feet for the filter basket here.

You can combine this with our Black-Friday Heater Special as well for only $75. If you order a heater, make sure to pick up a triclamp gasket and clamp as well! For a low cost controller, we recommend the 240 Volt Blichmann BrewCommander™ Brewhouse Controller. It is available elsewhere on the web for around $375 (Google it).

Quantities are Limited and All Sales Final on these units, no Returns!

Will will only ship these via Fed-Ex!

www.brew-boss.com

#blackfriday2020, #blackfridaysale, #brewbosssale, #20gallonkettle, #brewkettle, #biab, #homebrewing, #brew, #kettle

2020 Black Friday Special - 20 Gallon Kettle and Filter Only $199

2020 Black Friday Special ONLY $199

20 Gallon Kettle and Filter

$199 BLACK FRIDAY SPECIAL

20 GALLON KETTLE AND FILTER
LIMITED QUANTITIES

Here is your chance to pick up a genuine 20 Gallon Brew-Boss kettle with the matching patented COFI filter at below factory cost! This is our best Black Friday special ever. Note that the COFI filter does not include the center infusion tube or hose assembly. These are close-out filters that were received from the factory without those items and we do not have those items available.

https://www.brew-boss.com/Brewing-Filter-Clearance-p/2020blackfridaykettlefilter20.htm

This special includes the matching size COFI Filter 15" Dia.

The Brew-Boss Kettles have Welded 1-1/2" Tri-Clamp ferrules for a heater and valve or pump. The kettle also includes a Cover, Camlock Accessory Port, and Direct Contact Weldless Temperature Probe Mount. Includes etched volume markings in both Gallons and Liters.

These are optimum 1.2:1 ratio kettles!

20 Gallon Kettle Dimensions - 450mm Dia x 540mm H (17.75 in x 21.25 in)This special includes our clearance/closeout COFI filter. You will not find a lower price on brewing filters of these sizes. We received these COFI filters from the factory without center infusion tubes, so we are selling them at a deep discount without the center infusion tubes. Our loss is your fortune!

You can use this kettle and filter in the traditional Brew-In-A-Basket (BIAB) fashion as is. If you want to use it with the benefits of our patented (Patent Number US10400200B1) COFI (Center out forced infusion) filter system, you will need to fabricate your own center infusion tube. We do not have these available for sale.

The center infusion tube is a tube that has multiple holes drilled to distribute the mash water into the center of the grain bed during mashing (see photo diagram of the concept). There are 1/2" Male Pipe Threads on both ends, one end threads into the false bottom and the other end is used to attach a lifting ring that when lifted causes the false bottom to squeeze the remaining liquid out of the grains. If you want to make your own, the tube for the 20 gallon filter needs to be 15 inches long.

The 15 inch filter is 15 inches in diameter x 18 inches high. The support legs allow the filter to sit above the heating element and are 2-1/2 inches tall. This brings the total height of the unit to 20.5 inches.

This item includes the Kettle, Kettle Cover, Weldless Temperature Probe Mount, Camlock Accessory Port, Filter Body, Filter Cover, Locking Handle (doubles as lift handle), and False Bottom for Filter. It DOES NOT INCLUDE THE CENTER INFUSION TUBE OR RUBBER FEET FOR THE FILTER!

You can order the rubber feet for the filter basket here.

You can combine this with our Black-Friday Heater Special as well for only $75. If you order a heater, make sure to pick up a triclamp gasket and clamp as well! For a low cost controller, we recommend the 240 Volt Blichmann BrewCommander™ Brewhouse Controller. It is available elsewhere on the web for around $375 (Google it).

Quantities are Limited and All Sales Final on these units, no Returns!

Will will only ship these via Fed-Ex!

https://www.brew-boss.com/Brewing-Filter-Clearance-p/2020blackfridaykettlefilter20.htm

www.brew-boss.com

#blackfriday2020, #blackfridaysale, #brewbosssale, #20gallonkettle, #brewkettle, #biab, #homebrewing, #brew, #kettle

2020 Black Friday Sale - 240 Volt 5500 Watt Stainless Steel Ripple Heating Element with integrated L6-30P Plug

2020 Black Friday Sale

240 Volt 5500 Watt Stainless Steel Ripple Heating Element with integrated L6-30P Plug

ONLY $40!!!!

https://www.brew-boss.com/ULWD-L6-30P-Stainless-Steel-Ripple-Heater-Element-p/htr-5500-ripple-l6-30p.htm

240 VOLT 5500 WATT RIPPLE HEATING ELEMENT WITH INTEGRATED L6-30P PLUG AND TRICLAMP MOUNT

This product was designed by Brew-Boss and is manufactured exclusively for Brew-Boss!

Beware of cheap copies with rubber band covers over the high voltage terminals and corrosive parts. They are not safe and are poorly constructed. The Brew-Boss heater is 100% potted with epoxy and is waterproof. No worries when cleaning about getting water inside the element.

It features an integrated 1.5" Tri-Clamp ferrule as well as an integrated L6-30P twist lock plug! Never has it been so easy to convert to electric brewing. No longer do you have to figure out how to enclose your heater element to make it safe. Any L6-30R twist lock receptacle will connect to this element or use the Brew-Boss Heater Cable for a perfect fit.

This heater requires a 1.5" Tri-Clamp flange on your kettle (all Brew-Boss kettles have this flange welded on). If you are converting to electric or have another brand of kettle, you can add a Tri-Clamp flange by having one welded on locally or by using our Weldless 1.5 Inch Tri-Clamp Bulkhead Adapter.

The element is constructed of shiny 304 stainless steel and will look like new for years. it is an ULWD (Ultra Low Watt Density) element, so no worries about scorching your wort.

The element itself is 14 inches long and the ferrule is a 1.5" Tri-Clamp. Please order the clamp and gasket separately as they are not included with this item.

This listing is for the heater element only. Pictures of the element with the mating Brew-Boss Heater cable are shown only to show how the components fit together.

304 Stainless Steel
14" Long Ripple Style
240 Volts AC
5500 Watts
Ultra Low Watt Density
Integrated L6-30P Twist Lock Plug
Integrated 1.5" Tri-Clamp Flange
Epoxy filled making it waterproof

www.brew-boss.com

#heatingelement, #brewboss, #blackfriday2020,#brewbossblackfridaysale, #homebrewing, #ssheatingelement, #biab

Black Friday 2020 Sale - 5500 Watt SS Ripple Heating Element and 8 ft Long Power Cord

Black Friday 2020 Sale!

5500 Watt SS Ripple Heating Element and 8 ft Long Power Cord

Only $75

https://www.brew-boss.com/5500-Watt-Ripple-Heating-Element-and-Cable-Kit-p/htr-5500-kit-elementandcable.htm

240 VOLT 5500 WATT RIPPLE HEATING ELEMENT WITH INTEGRATED L6-30P PLUG AND MATCHING 8-FOOT LONG L6-30 POWER CABLE

This product is manufactured especially and exclusively for Brew-Boss!

It features an integrated 1.5" Tri-Clamp ferrule as well as an integrated L6-30P twist lock plug! Never has it been so easy to convert to electric brewing. No longer do you have to figure out how to enclose your heater element to make it safe.This item includes the matching 8 Foot Long Brew-Boss Heater Cable for a perfect fit. This cable plugs directly into the Brew-Boss V2.0 or Pro Series Controllers.

This heater requires a 1.5" Tri-Clamp flange on your kettle (all Brew-Boss kettles have this flange welded on). If you are converting to electric or have another brand of kettle, you can add a Tri-Clamp flange by having one welded on locally or by using our Weldless 1.5 Inch Tri-Clamp Bulkhead Adapter.

The element is constructed of shiny 304 stainless steel and will look like new for years. it is an ULWD (Ultra Low Watt Density) element, so no worries about scorching your wort.

The element itself is 14 inches long and the ferrule is a 1.5" Tri-Clamp. Please order the clamp and gasket separately as they are not included with this item.